Constitution
The from HK-100 small car essence, the control box, the X-Y slippery piece, the gun tongs, the direction round, leads a track straightly etc. the parts constitute.
1) Little car owner's body: BE also a small car to drive device, include electrical engineering, the planet decelerates a box, driving wheel gear and leading to an etc..
2) Control a box. Can regulate all actions of the small car, the detailed contents makes reference to follow-up "the control panel elucidation"
3) The Horizontal move device: the Be welding to keep to sew(the if gather to pack) to make use of this device to adjust the torch position, avoid multifariously ambulation leading a track.
4) The torch is tiny to adjust a slippery piece. BE the device that regulates the gun position, weld in the middle can carry on a top and bottom or so tiny adjust.
5) Swing a machine: Weld process in various weld mode to need him to carry out.
6) The gun clips to hold a machine. BE the device of the fixed gun, maintain and the adjustment is a convenient gun to dismantle to unload. The torch must clip tightly, notice and clip Be conducting electricity part, then will cause short-circuit or electric shock.
7) AC outlet: In order to circumscribe the electric cable electric outlet, this the machine connects a ground of line to also connect with each other with this electric outlet. This electric cable electric outlet is responsible for a small car and sends the conjunction and the electricity supply of the silk machine (Electric cable of another on carrying two branches, a connects to send the silk machine, the another connects power supply.)
8) Hand handle: The ambulation equips originally, please fist this hand handle.
9) Leaving to match the hand handle, pulling to move this hand handle can let very conveniently the small car move freely on the orbit.
10) Lead a track straightly. The convenient and small car runs about route. The gearing has strong dint always the magnetic iron, letting to lead a track to adsorb the work piece firmly on, the orientation is various to weld a need.
11) The Magnetic iron: The strong dint leaves the match type magnetic iron, the please control all the switch to go to "OFF" while moving to lead a track.
12) Lead to a round: Along the female material noodles roll over, guide accurate weld
the device of the part.
13) The Gun: the Keep the gun or curved gun, the customer make choice of purchase.
magnetic rail welding carriage
Main technical parameter
1. Weight |
8.4Kg (Included swing device) |
|
2. Outline dimension |
430*280*290mm |
|
3. Driving mode |
Four rims driving (Rubber rim) |
|
4. power |
DC 24V |
|
5. Swing motor |
DC24V |
|
6. Speed |
30~~800 (mm/min)( Display by nixie tube) |
|
7. Tracking mode |
Rail |
|
8. Range of adjusting welding torch |
Up and down:40mm Front and rear:60mm. Range of working angle:±45° Range of adjusting angle: 10° |
|
9. Operation function |
Choose walk direction |
Left and right |
Swing speed |
0~100 |
|
Swing angle |
±15° |
|
Adjust walk speed |
0~130cm/min |
|
Length of stay on left or right |
0~2.5 s |
|
Set position of deviation |
0~±8° |
|
10. Choose swing model |
|
Welding technical parameters
welding wire diameter welding parameter |
Φ1.2mm |
Φ1.4mm |
Φ1.6mm |
|
current(A) |
Down hand welding |
120-300 |
150-380 |
180-430 |
flush fillet welding |
120-280 |
150-320 |
180-380 |
|
horizontal welding |
120-280 |
150-300 |
180-330 |
|
voltage(U) |
|
|||
distance between nozzle and workpiece(H) |
|
|||
welding extension length(L) |
The length is about 10 times welding wire diameter. It is L=10d |
1. After quality testing, each HK-100 rail runner welding carriage will be packed into carton or wooden box.
2. Or according to your request.
3. Our delivery:7~15 working days. We can arrange the shipping by Courier (DHL, UPS, FedEx, TNT etc.) by air or by sea for you.
Contents of package
1. |
complete machine |
1set |
2. |
The straight rail(1.8 m) |
1set |
3. |
Standard power wire (16M) |
1set |
4. |
Fuse(2A) |
2set |
5. |
hex wrench |
1pc |
6. |
Operating manual , Certificate of qualification |
1pc each |
Nanning ChuanJun Welding Hardware Co., Ltd. , founded in 2004, focus on welding equipment and accessory for more than 10 years. Our products are MMA, TIG welder, MAG/MIG welding machine, SAW welding machines, cutting machine, welding accessories, and welding materials.
Workshop
Quality Control
Warehouse
1.Q:Are you a factory or trading company?
A, Yes we are the factory and have 5 production lines for us.
2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
5.Q:What's the Payment method?
A:T/T, 30% deposit before production, the balance before delivery.(only big order)
We sugguest you transfer the full price at one time. Cause there is bank process fee, it would be a lot of money if you make twice transfer.
6.Q: What is our payment term?
A:We can accept the payment by Credit card and T/T and Trade assueance .
7: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.
8.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;
Product informaiton:item number,size,quantity,logo,etc
If need other items, please click below links: