HiTag2 v.3.1 programmer is universal key programmer, with additional options of key programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically.
CAR KEY MASTER II (Gambit programmer)is intended for RFID ( transponders ) programming.it is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle.
Gambit programmer works with PCF7935, PCF 7936 and T5 transponders which are not procedured and are completely blank.
1.for BMW (CAS1/2/3/3 +) at 912/9S12 immo + remote control, editing, KM, VIN, reading data from the key, read / write eeprom of the transponder, reading data from remote
2.for AUDI (Kessy) on 93C66 immo + remote, read PIN, edit VIN number and immo
3.for VW (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
4.for PORSCHE (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
5.for BENTLEY (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
6.for CHRYSLER (State) on the 95040/95080 immo + remote, read PIN, VIN Edition
7.for LAND ROVER (EWSx) to immo 9S12, editing VIN
8.for NISSAN (NATS) at 95,080 immo
9.for OPEL (CIM) in the 9S12 immo + remote, read PIN, VIN Edition
10.for RENAULT (UCH) on 93C66 immo + remote, read PIN, VIN Edition
11.for SAAB (CIM) for the 93LC66 immo + pilot edition of the VIN
1. Latest versions of HiTag2 transponders are fully supported.
2. Widest range of supported cars, using HiTag2 protocol.
3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
4. Correct for BMW keys programming - RADIO REMOTE is working.