HG-5020 Standard ISO10816 Vibration tester / Vibration analyzer HG-5020

HG-5020 Standard ISO10816 Vibration tester / Vibration analyzer

Digital Vibration Calibrator Calibrate Vibration Meter Vibration Analyzer Vibration Tester ISO10816
Frequency(continually adjustable): 10 to1280Hz +0.01%
 
Application for ISO10816 HG-5020 Vibration Calibrator:

1.Can be used to calibrate vibration accelerometer, velocity and proximity transducer and also a vibration measuring instruments. Standard sine signals at frequency 10, 20, 40, 80, 160, 320, 640 and 1280 Hz

2.Can be generated from the calibrator the amplitude of the acceleration, velocity and displacement

3.Can be defined through potentiometers and shown on digital displays. Either horizontal or vertical vibration can be generated.

4.HG-5010 vibration calibrator combines sine signal generator, power amplifier, standard transducer and a shaker in one and features a small volume, high accuracy and easy operation. It can be used either in laboratory or on site.

5. International standards: ISO10816

 
Specifications:
 
Frequency: Not fixed, Frequency(continually adjustable): 10 to1280Hz +0.01%
Unit:
Acceleration:   m/s²  (PEAK)
Velocity:       mm/s (RMS)
Displacement:  um   (PK-PK)
Amplitude accuracy:
Acceleration (30m/s² pk, 80Hz) 40Hz to 320Hz + 0.3dB + 1digit
10Hz to 1280Hz + 0.5dB +1digit
Velocity ( 25mm/sec pk ,80Hz) 40Hz to 320Hz +0.5dB +1digit
Displacement (10μm pk-pk, 80Hz) 40Hz to 320Hz + 0.5dB + 1digit
Proximity probe linearity
Prode: 5mm and 8mm probes Range: 0~4.0mm
Display: 3 ¹/₂ digit display for acceleration, velocity or displacement
Maximum vibration amplitude and maximum load:
Because of the vibrostand used in HG-5010 Vibration Calibrator is rather small, during the calibration of transducers of different weight under different frequencies the output amplitude of the calibrators are also different. Maximum vibration amplitude and maximum load are related to the maximum acceleration. Maximum velocity and maximum displacement output generated from the calibrator under a certain frequency and with a certain weight of the transducer to be calibrated. The specific figures can be seen in the following table.

Note: With higher frequency the value of the displacement of vibration is very small so there will be no vibration signal output from the calibrator.

Size: 280 x 180 x 250(mm)

Weight: 20lb,9kgs

Temperature: Operation: 0^oC to 50 ^oC

Storage: -20 ^oC to 70 ^oC

Humidity: 90% non -condensing

1 Vibration amplitude output display Showing the amplitude of the different vibration signal output of the calibrator
2 Calibration potentiometer
3 Function selecting switch   Shifting the output of the calibrator to acceleration, velocity or displacement
4 Potentiometer for adjusting the output amplitude
   Adjusting the potentiometer to change the output vibration amplitude
5 Adjusting the the output vibration amplitude slowly
6 The table for fixing the transducer to be calibrated
7 The thread hole for fixing the stand of proximity probe
   During the calibration of proximity probe, the stand of the transducer is fixed on the control panel  through this thread hole.
8 Power switch 220 VAC
9 Socket for 220 V AC power input
   Used for connecting 220 V AC power.
10. Socket for power output
     For monitoring the wave shape of the output signal of the power amplifier of the calibrator.
11 Output socket of – 24 V voltage
   Providing power at – 24 V for proximitor during the calibration of proximity probe.
12 Frequency selecting switch
 

HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified competitive products and service to international markets. 

HUATEC Group products are composed of all kinds of metal and non-metal testing equipments, such as portable hardness tester, micro hardness tester, shore durometer, vickers hardness tester, Rockwell hardness tester, Brinell hardness tester, portable X-ray flaw detector, mobile X-ray flaw detector, Real-time X-ray image flaw system, holiday detector, digital portable eddy current electrical conductivity meter, digital ultrasonic flaw detector, coating/painting thickness gauge, ultrasonic thickness gauge, vibration tester, surface roughness tester, profile projector, etc, and all of their accessories such as ultrasonic transducer, test block, IQI, lead screen, densimeter, film viewer etc.

We have more than 15 R&D engineers in our group company, who make sure the produced product to be best quality. And more than 10 new products will be developed every year.

Q1. How about your samples?

Yes, we can serve you our samples for your test (Freight collect). You also can get a refund of the freight cost when the bulk order is placed.

Q2. How much for the freight?

It depends on your area, we will use DHL, FedEx and EMS bulk service, it had discount as normal express service. And we can return freight while you place order.

Q3. Do you have discount for large quantities?

Yes, It not only depends on your order quantity, but also the item you booked.

Q4. What about delivery?

Prompt shipment after receipt of order confirmation for regular products.

We can offer the free samples

We can accept OEM/ODM

The mass production is accordance with the samples

We can packed the production well and safe.

We can answer your questions in time after sale