HF Vertical Vibration Casting Pipe Making Machine

HFXG-1500 concrete pipe making machine

Brief introduction:

Suspension Roller type Concrete pipe machine is a kind of perfect machine and equipment to produce reinforced concrete pipes and Pre-stressed concrete pipe. This machine is capable to make pipes with diameter from 300-2000mm and with length from2-4meters. We can design many kinds of the pipe joint, including flush joint, socket& spigot joint  And all the concrete pipes are widely used in administrative drainage, agricultural field irrigation, road culvert and deep water well.

Working Principle

 This machine uses the Roller to support the pipe mould, and produce the roller force to concrete in the mould. When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.

 Character of Suspension Roller type Concrete Pipe Machine

(1) Short production Cycle: because of the good effect of the roller to compact the concrete, every pipe just need 3-5 minutes with high speed roller rotation.

(2) This Pipe machine uses the dry cast material, there will no waste cement mud, then it won’t pollute the environment.

(3) During the production, the noise is low, it is about 80-90 DB

(4) The Concrete Pipes are with high pressure load and with high production efficiency.

The Suspension Roller Concrete Pipe Production line includes: Pipe machine, Pipe mould, concrete Feeder, concrete Mixer. The structure of this pipe machine contains: Main Machine Frame, Roller, Movable gantry frame, electric motor and driving machine.please refer to the Appendix chart.

(1)Main Machine frame is used to install the motor, roller and driving parts, it is the mainly supporting part of this machine, its structure is in good design, and with good stability.

(2)Roller is the important part of this pipe machine, its function contains the following three respect: A. It support the weight of pipe mould and concrete; B. It drive the mould to rotate via the spacer;C. It produces the roller force to the concrete in the mould.

(3)The function of the movable gantry is used to support the head of the roller,and it can revolve horizontally, there will some fixed wedge pins to lock it when it is closed.

(4)The driving system is mainly used to control the rotation of the roller, and provide the power to form the concrete pipes. It is made of motor, pulley, roller,belt, bearing and bearing carrier.

(5)The pipe mould is including the mould body, spacer, bolts and screws for closing the mould. According to different pipe joint, there will be flush joint, groove joint, socket&spigot joint.

(6)The computer panel is used to control the electric motor, to finish its electromagnetic control variable speed. There is Air-switch,Fuse, Time-Relay in the panel, their function is short-circuit protection, overload protection, open-phase protection.this panel is safe ,reliable and easy to operate and repair.

(7)Concrete Feeder is an assistant machine that is designed for ease worker's manual liability. It can delivery the mixed concrete in to the mould evenly. It is made up by rotary drum, belt,guide pulley, machine frame, driving motor.

There are many types of concrete pipe making machines in our company. The lenght is from 1m to 4m and the diameter is from 300mm to 2000mm. If you need it, please call me at 86-18769918897or send email. Waiting for your contact. We will give you the best price and best service.