HDPE DMDA-8008
1. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade.
2. good quality and reasonable price
3. non-toxic adorless .
Technical specifications(HDPE)
Film Grade HDPE
Item | Test condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.944-0.955 | g/cm3 |
MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
Tensile strength at yield | | ISO 527-2 | 22 | MPa |
Elongation at break | | ISO 527-2 | >350 | % |
ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
VICAT | | ASTM D-1525 | 126 | °C |
Blowing molding Grade HDPE
Item | Test Condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.950~0.955 | g/cm |
MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
Tensile strength at yield | | ISO 527-2 | 24 | MPa |
Elongation at break | | ISO 527-2 | >600 | % |