Support 3G/SD/HD-SDI&A/V sync transmission
PRODUCT INTRODUCTION
This coaxial(SDI) extender is with a SDI-TX ,which change the HDMI signal into RGB signal over coax cable ,the RGB signal converts to SDI signal (3G/SD/HD) which sending to SDI-RX via coaxial,eventually HDMI signal output from SDI-RX
The audio signal brought by SDI will embedded in the HDMI signal after the separation and coverting in order to achieve sound and image synchronization transmission,lossless and without delay. This extender Supports distance up to 60 meters by coaxial cable.This product with superior A/V quality and high reliability, low power consumption.
It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Features
1.SDI (BNC female) compatible with SMPTE 424M, SMPTE 292M and SMPTE 259M
2. HDMI 1.3
3.Resolution: 576I,480I,720P50/60Hz,1080I50/60Hz,1080P50/60Hz
4.EDID learning,DIP for EDID management control,more compatible
5. Support 2.1/5.1/7.1 stereo audio
6.Support video and audio sync transmission
7.Support bidirectional IR control
8.RS232 source,transferred together with the HDMI signal, could control the sources from the sinks or control the sinks from sources.
Specifications
SDI signal | 2x SDI(BNC female),support SD/3G/HD-SDI |
SDI signal format | SD-SDI(270mbps) HD-SDI(1.485Gbps) 3G-sdi(2.97Gbps) |
SDI signal amplitude | 0.8 volts p-p |
SDI impedance | 75 Ohm |
HDMI version | HDMI 1.3 |
Max HDMI signal Resolution | 1080P/60Hz |
Max bandwidth | 225MHz,support 36 bit deep color |
Operating temperature range | (-15 to +45°C) |
Operating Humidity range | 5 to 90%RH (No Condensation) |
Power adapter format | DC 5V/2A |
Dimension (LxWxH) | 125mmx115mmx30mm |
Net Weight | 360gX 2PCS |
Physical Connection Showing Picture:
DIP switch setting instruction:
SDI-TX
Position1 | Function |
0 | Range scaling disenable. |
1 | Range scaling enable. |
Position2 | Position3 | Function |
0 | 0 | 1080P stereo (Using Embedded EDID) (note1) |
0 | 1 | 1080P 5.1 (Using Embedded EDID) (note2) |
1 | 0 | 1080P 7.1 (Using Embedded EDID) (note3) |
1 | 1 | EDID auto copy (note4) |
Note1:The OP5 will use the embedded 1080P-stereo EDID when the DIP switch is in this mode. The EDID will be 1080P video and stereo audio.
Note2: The OP5 will use the embedded 1080P-5.1 EDID when the DIP switch is in this mode. The EDID will be 1080P video and 5.1 audio.
Note3: The OP5 will use the embedded 1080P-7.1 EDID when the DIP switch is in this mode. The EDID will be 1080P video and 7.1 audio.
Note4: Auto copy the EDID data to the input port. SDI-TX will copy the EDID data from the sink which connected to the SDI-RX.
SDI-RX
Position1 | Position2 | Position3 | Function |
0 | 0 | 0 | Normal mode,8bit color depth |
0 | 0 | 1 | LC mode(note1), 8bit color depth |
0 | 1 | 0 | Normal mode, color depth decided by the sink. |
0 | 1 | 1 | LC mode (note1), color depth decided by the sink. |
others | Normal mode,8bit color depth |
Note1: if video appears noise or interference when the long HDMI cable is used or the quality of HDMI cable is not so good, use this mode.
Packing Content:
1. SDI transmitterx1pc
2. SDI receiverx1pc
3. 5V DC Power adapterx2pcs
4. IR-TX cablex1pc
5. IR-RX cablex1pc
6. User Manualx1pc
More tips to you :
The above description is for a HDMI extender over coax(SDI) ,here is a suggestion to you ,you can get more function :
The single SDI-TX can work as a HDMI to SDI converter
The single SDI-RX can work as a SDI to HDMI converter