1. The plate is press by the special equipment, the surface is smooth, and the concave shape of the plate is good for reduce the pressure of the water pressed to the plate.
2. The plate is made of Q235 steel.
3. The thickness of the plate : 5mm, 4mm, 3mm, 2.5mm, 2mm
It is different according the size of the tank.
4. The size of the hot dip galvanized steel plate: 1000mm*1000mm, 1000mm*500mm,
5. The size of the water tank, it can be design according the size of the location place, the tallest height is 5meters.
The hot dip galvanize tank is suitable for:
1. Construction water storage
2. Regulating tank
3. Heating system's inflation water tank
4. Defense project, firefighting, fire proof water storage.
Water Tank Height (mm) | Thickness of each panel (mm) | ||||||||||||
Bottom | 1st side | 2nd side | 3rd side | 4th side | 5th side | Top | |||||||
1000 | 3 | 3 | / | / | / | / | 2 | ||||||
1500 | 3 | 3 | 3 | / | / | / | 2 | ||||||
2000 | 3 | 3 | 3 | / | / | / | 2 | ||||||
2500 | 4 | 4 | 3 | 3 | / | / | 2 | ||||||
3000 | 4 | 4 | 3 | 3 | / | / | 2 | ||||||
3500 | 4 | 4 | 3 | 3 | 3 | / | 2 | ||||||
4000 | 5 | 5 | 4 | 3 | 3 | / | 2 | ||||||
4500 | 5 | 5 | 5 | 4 | 4 | 3 | 2 | ||||||
5000 | 5 | 5 | 5 | 4 | 4 | 3 | 2 |
If you are interest in our Galvanized Steel Water Tank, please feel free to "SEND" us an inquiry.
1. Support for Panels: The panels shall be supported externally or internally by an adequate support system.
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on Galvanized Steel products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally and internally are hot dipped galvanized steel .
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel.
5. Ladders: Sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent.
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter.
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of: 600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement.
9. ABS roof vent with PE insect screen.
10. Float level indicator, optional SS304 for internal and external support structure are available on request.
If you are interest in our Water Tank, please feel free to "SEND" us an inquiry.