Features:
l 1X HD MI input and 2X HD MI output,can sync separation HD MI audio signal. Supports 1x SPDIF optical digital audio output, 2 channel RCA analog audio output
l Support HD MI input up to 1080P/60Hz, supports 3D (24/30fs)
l Support SPDIF digital audio format: Dolby digital (AC3), DTS, LPCM, and support 5.1CH
l Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV).
l LED indication: when source or sink is working, LED relative to is light.
l Uses 24bit /192KHz DAC
l No loss of quality
l Installs in minutes
l DC5V/1A power adapter
PACKAGE CONTENTS:
1. Main unit 1pcs
2. AC power adapter 1pcs
3. User manual 1pcs
FEATURES OF THE INTERFACE:
DC5V: 5V DC in jack
OPTICALOUT: SPDIF Optical/Toslink output
PWR LED:POWER ON/OFF indicator
HDMI IN: HD MI input
SWITCH: Audio EDID mode switch. This switch allows users to select the source's audio EDID.
PASS:HD MI pass mode. Switch to PASS mode for the HD MI source to output audio per the
EDID of connected TV or AV receiver supports up to LPCM 7.1 channels.
2CH:2CH LPCM mode. Switch to 2CH mode for the HDMI source to output LPCM 2 channels
audio per the built-in EDID. Then HDMI, SPDIF, RCA and headphones output stereo audio.
5.1CH:5.1CH bitstream Mode. Switch to B5.1CH mode for the HD MI source to output bitstream
audio per the built-in EDID. Then HD MI, SPDIF and RCA output 5.1CH audio, the headphone output audio comes from FL and FR channel
HDMI OUT1/2: HD MI output
L-OUT-R: Stereo analog audio output
GREEN LED:HDMI OUTPUT indicator
OPERATIONG AND CONNECTION:
1. Connect one HD MI cable from a DVD/Blu-ray player into the HD MI input port of converter.
2. Connect one HD MI cable from TV/Monitor into the HD MI output port of converter.
3. If you need a digital audio, connect one optical fiber from digital power amplifier into the SPDIF
output port of converter.
4. If you need an analog audio, Connect two AV cables from analog power amplifier/TV into the analog
audio output ports of converter, the channel must correspond, and switch EDID mode in 2CH.
5. Connect 5V power supply to the converter and inserted into the power socket.