Track all moving targets in the image,
The DVR generates an alarm when the edge of the target (upper left, lower left, upper right, lower right) exceeds the set rule.
Cordon:User set cordon in the image range and set prohibited direction.When a specified type of target crosses this cordon while the forward direction is consistent with the prohibited direction,DVR will alarm.
Perimeter alert:The user sets a prohibited area of any shape within the image range. Also set the alarm type to ‘go out’ or ‘enter’.when the target triggers the set rule, the DVR will alarm.
Note:
1. The warning area only supports 8 fixed-points at most.
2. Each DVR only supports setting one Warning area.
3.The warning area should not set too close to the edge of the image.
4.The warning area should be set out more than expected position.