Product Attribute | Attribute Value |
---|---|
Series | 1590 Series |
Surface | Particlulates Vibration grinding to Anti- Oxidation |
Material | Die-Cast Aluminum |
IP Rating | IP54 |
Size1 with Lid | 3.7"*1.52"*1.27" |
Size 2 with Lid | 93.8mm*38.7mm*32.3mm |
Size 3 without Lid | 3.7"*1.52"*1.1" |
Size 4 without Lid | 93.8mm*38.7mm*28.1mm |
Package | 1 Enclosure+1 Lid+ 4 pieces SS Screws |
Screw Type | 6-32*1/2 |
Manufacturer or Trader | Manufacturer |
Notes | Hammond 1590A Clone |
How to use for 1590A Diecast Alumium Case with Vibra Finish
These Diecast Case for Music Devices:
Bass Pedals, Chrorus, Phase Shifers,Flanges,Distrotion, Fuzz, Filters,Overdrive, Foot Switches,Foot controllers, Mutti Effect,Noise Gate,Noise Suppresion,Octave,Synthesis,Pitch Preamps,EQs & Tone Shaping, Reverb,Tremo & Vibrato, Tube Pedals,Vocal Processors,Etc.
85% Cost Effective Custom Drilled Holes Service By Punching Machine to Use Custom Punching Toolings.
Siz Range | Not normally over 2.7feet square |
Parts Weight | 0.01pounds to 14 pounds |
Setup Cost | New die casting tooling is free |
Tolerances | 0.02inch,add0.01inch to 0.015inch across parting line up to part size |
Die Casting Finish | 32~63 RMS |
Minium Draft | normally 1° |
Billet | normally 0.04inch |
Normal Minimum Section Thickness |
0.060inch for small parts; 0.090inch for medium parts |
Ordering Quantity |
For first trial order: not less than 100pcs; Usually 1,000pcs or more. |
Normal Leadtime |
Tooling: 4~12 weeks update part size; Samples: one week if no finish and CNC machining required; Production:2~3weeks |
1.What service can you offer?
We can offer one- stop solution for high pressure die castings from tool engineering, designing & developing, casting, machining, finishing, assembling, packing and shipping.
2. What about your prices?
Kinds of die casting machines/equipment and skilled engineers will keep our prices very competitive without compromising the part`s quality.
3. What is your MOQ?
No requirements on the MOQ;
Flexible volume is accepted by us in view of this new project growing.
4. What is your Quality Control?
As an IATF16949 certified high pressure die casting manufacturer, we encompass this quality management system during the manufacturing. Also, some testing equipment help us to find the problems on time.
5. What is your payment term?
For tooling/mold cost, 50% as a deposit and the balance paid after samples approved by customer.
For bulk order, 30% as a deposit and the balance paid after negotiation.
6. What is the delivery date?
For tooling/mold, it will take 35~45days that is up to the design.
For mass production, it will take 10~30days that is up to your quantity.
7. Are you a trade company or factory?
We are a Factory in Beilun, Ningbo which is near to Shanghai.