Item | P-90D |
Capacity (27℃,RH60%) | 50L/D |
Capacity (30℃,RH80%) | 90L/D |
Capacity (32℃,RH90%) | 100L/D |
Rated input power | 1.2Kw |
Rated input currnet | 5.5A |
Circulating air flow | 800 m3/h |
Air outlet pressure | 80~100 Pa |
Serve area | 90~120 m3 |
Humidity range | RH45%~95% |
Control panel | LCD |
RS485 connection | Available |
Mutiple connection | Available |
Remote controller | Available |
Continuously drain | Available |
Dehumidification principle: under normal start-up, the wet air is sucked from the air inlet through the fan operation. After passing through the evaporator, the moisture in the air is absorbed on the aluminum sheet and turned into dry air, which is blown out from the air outlet through the condenser heat dissipation.
Refrigeration principle: the gas with high temperature and high pressure is discharged from the exhaust port of the compressor and cooled into low-temperature and high-pressure gas in the condenser. Through capillary throttling, it turns into low-temperature and low-pressure liquid. Through evaporation and heat absorption of evaporator, it returns to the compressor and turns into low-temperature and low-pressure gas, which goes on and on.
Install the machine stably with screw suspender on the ceiling,
and make sure there over 2 degree slant angle to the drainage tube for smooth continuously drainage
Q1.When can I get the quotation
A:We usually give the quotation within 24 hours after receiving your inquiry. If you are in a hurry to ask for a quotation for a large order, please let us know in the email and we will reply your inquiry as soon as possible
Q2.How can I get product quality assurance?
A:After the order is generated, you can ask for samples to check our quality standards. If you need samples, we can provide some samples free of charge (excluding freight)
Q3.What trade methods are supported?
A:FCA ,FOB,CIF,FOB,DDU,DDP,
As far as possible to meet the needs of the buyer