Greenhouse Steel Anti-corrosion Twin Wall Tremie Pipe Suppliers

The tremie concrete placement method uses a pipe, through which concrete is placed below water level.

The lower end of the pipe is kept immersed in fresh concrete so that the rising concrete from the bottom displaces the water without washing out the cement content.

Tremie Pipe with Wire Cables includes:

Hopper, Lifting Cap, Wire Cables, O-Ring, Rack, Female Joint, Male Joint, Tremie Pipe, Tremie Rack.

Tremie Pipe Threaded includes:

Hopper, Female Joint, Male Joint, Tremie Pipe.

The accessories compatible with rotary drilling rig includes:

mud mixer, tremie pipe, wellhead jacket, funnel,wrench,lifting lug,clean-out auger and so on.

Tips of casing and tubing for piling project

1. The pipe casing should avoid to the collision, especially of casing joints knock against when install the  casing bolts, it must be clean, otherwise it will cause the difficult installation.

2 .The drilling bucket needs to be chiseled in advance when pile casing drives the increased torque to diffcult.

3. The drilling bucket needs to be checked position and verticality of hole, to avoid opening the door at  the hole  bottom when lift the drilling open and closed  against to casing shoes.

4. You must be tested all movements of pulling machine normally before concreting .Pull up pipe casing  immediately to prevent steel trunk floating after the end of grouting

Q1.Can it be customized?

A.Can be customized to any size, can provide on-site measurement!

Q2.Can it be used in a cold environment?

A.Can be used, we have a construction case of minus 50 degrees to ensure quality!

Q3.Is there any after-sale service?

A.Yes, engineer on site service available