1. Concentration of calcium chloride solution: 35-55%
2. Calcium chloride product: 94%
3. Temperature of solution: <60℃
4. Capacity: ≥20000 tons per year
It has low heating cost, that 20% of the diesel oil, 30% of heavy oil. Use bituminous coal as fuel and the thermal efficiency is more than 90%. The coal consumption of 1 ton base powder is about 70-100kg, saving energy of 30-40% compared with that of coal gas.
High cleanliness of the hot air, almost same as the oil-fired. The dust content is less than 80mg/Nm3, with long cleaning period. All the hot air enters into the spray tower, and no secondary pollution during the production.
The hot air temperature is adjustable, from 200 to 800℃, and the fluctuation range is ±5℃.
Our Workshop
Our Warehouse
Our Team
Packing Details : Packing 40FR, Calcium chloride granulation plant/Calcium chloride granulation plant/Calcium chloride equipment
Delivery Details : 30-90 days after order of Hot air furnace
Banghua International Granulation Engineering Co., Ltd. is specialized in hot air furnace, heat exchanger and fluidized-bed spray granulation, evaporation, concentration and drying complete equipment. We could provide you a systematic solution with design, manufacture, installation and commissioning..
Banghua International Granulation Engineering Co.,Ltd is specialized in the hot air furnace,heat exchanger technology research,development,design,production, installation,commissioning and other engineering contract.Relying on our own scientific and technological strength,we always commit to advanced stove,heat exchangers and other equipment design and manufacturing technology development. Self-developed direct coal (biomass)-fired hot air furnace and indirect coal (biomass)-fired hot air furnace which has hit the leading domestic level,are widely used in heating,drying,reaction, calcined and other industries.
A certain amount of hydrochloric acid is put into the reaction pool, and the limestone (or other calcium carbonate containing raw materials, such as calcium carbide mud, etc.) is put into the reaction pool proportionately, and the PH value is adjusted by calcium hydroxide (to make the solution alkaline) after the reaction. The solution (containing insoluble solid impurities) is pressed into the filter press by the mortar pump and enters the concentration or directly granulation process, and filter residue is sold as building materials. A small amount of hydrogen chloride gas is brought out during the reaction, and is pumped by the fan into the exhaust gas absorption tower. After two stage absorption (absorption of calcium chloride solution at the first stage and water absorption at the second stage), and the gas can reach the discharge standard.
The concentration of calcium chloride will be different because of the different concentration of hydrochloric acid. And the subsequent process is usually selected according to the requirements of calcium chloride products and the concentration of calcium chloride solution. If we need to produce anhydrous calcium chloride granules, the recommended solution before granulation is 35%--45%. If the solution is too dilute, it is necessary to use the evaporation and concentration device. If calcium chloride dihydrate flake is needed, the solution is directly condensed to 70% with several stages, and then flaked and dried. The amount of the evaporation stages is calculated and determined according to the concentration of the solution.
A: Banghua International Granulation Engineering Co.,Ltd is specialized in the hot air furnace,heat exchanger technology research,development,design,production,installation,commissioning and other engineering contract.Relying on our own scientific and technological strength,we always commit to advanced stove,heat exchangers and other equipment design and manufacturing technology development. Self-developed direct coal (biomass)-fired hot air furnace and indirect coal (biomass)-fired hot air furnace which has hit the leading domestic level,are widely used in heating,drying,reaction,calcined and other industries.
A: Generally it is 30-90, it is according to your details capacity demands and our factory busy situation.
A: Yes, we have many domestic and overseas site cases could for your investigation.
40% T/T in advance, 50% balance before shippment, 5% after installation and commissioning acceptance, 5% within 10 working days from the date of the expiration of warranty period of one year .
If you have another question, pls feel free to contact us as below:
Mr. Michael Zhang
sales at ca-bh.com
+86 15269108961