PROPERTIES | VALUES | RULES |
Density | 1.19 g/cm3 | ISO 1183-1:2012 Method A |
Rockwell Hardness | 112L | ISO 2039-2:1999 |
Tensile Modulus | 3150MPa | EN ISO 527:2012 |
Tensile Strength | 80.0MPa | EN ISO 527:2012 |
Tensile Strain at Break | 3.2% | EN ISO 527-1:2012 |
Water Absorption | 0.20% | ISO 62:2008 Method 1 |
Total Luminous Transmittance | 93.4% | ISO 13468-1:1996 |
Vicat Softening Temperature | 105℃ | ISO 306:2013 Method B50 |
Light Ageing Test- UV Exposure | Grey scale: 5 | ISO 4892-3:2016 Cycle 1 |
Mean Coefficient of Linear Thermal Expansion | 72×10-6 K-1 | ISO 11359-1:2014 |
Compressive Stress at Yield | 129MPa | EN ISO 604:2003 |
Flexural Strength | 120MPa | ISO 178:2013 |
Compressive Yield Strength | 111MPa | ASTM D695-15 |
Compressive Modulus | 3450MPa | ASTM D695-15 |
Shear Strength | 59.7MPa | ASTM D732-17 |
Deflection Temperature under Load | 100.2℃ | ASTM D648-18 Method B |
Modulus Elasticity | 2810MPa | ASTM D695-15 |
Normal Cast Acrylic Sheet | ||||||
Code | Thickness | Size with Rubber edge | Size after cut edge | |||
D | 2.8-12 mm | 1550x3050 mm | 1510x3020 mm | |||
M | 2.8-12 mm | 2050x3050 mm | 2000x3000 mm | |||
Q | 1.8-30 mm | 1260x1870 mm | 1220x1830 mm | |||
L | 1.8-30 mm | 1270x2490 mm | 1220x2440 mm | |||
Large L | 2-25 mm | 1330x2550 mm | 1250x2500 mm | |||
Large Q | 2-25 mm | 1330x1940 mm | 1250x1850 mm | |||
Y | 2-15 mm | 1820x2480 mm | 1750x2440 mm | |||
E | 2.7-12 mm | 1650x2650 mm | 1610x2600 mm | |||
Z | 2.5-15 mm | 1560x2560 mm | 1500x2500mm | |||
T | 1.8-30 mm | 1250x2450 mm | 1200x2400mm | |||
H | 1.8-30 mm | 1250x1850 mm | 1200x1800mm | |||
Single Side Frosted | 2-15 mm | 1270x2490 mm | 1220x2440 mm | |||
Single Side Frosted M | 2.8-11.6 mm | 2050x3050 mm | 2000x3000 mm | |||
Double Side Frosted | 2-15 mm | 1250x1850 1250x2450 mm | 1220x1830 1220x2440 mm |
Aquarium Cast Acrylic Sheet - Clear | ||||||
Size | Thickness | Size | Thickness | |||
1300*2500 | 20-70 | 5000*1800 | 30-150 | |||
1350*2650 | 20-100 | 5500*2100 | 30-150 | |||
1450*2700 | 20-100 | 6200*3000 | 50-250 | |||
1600*2600 | 20-100 | 6700*3000 | 50-250 | |||
1650*3150 | 20-100 | 8200*3000 | 80-250 | |||
3200*2200 | 20-110 | 8700*3000 | 80-250 | |||
3500*1650 | 20-110 | 11500*3000 | 100-250 | |||
4250*2750 | 30-110 | 8100*3700 | 120-300 |
Application Characteristics of GRANDVIEW |
absolutely colorless and clear |
break-resistant to impact-resistant |
unequalled resistance to weathering and aging |
high-quality surface and planarity; high-gloss, textured or satin |
solid sheets, blocks, tubes, round and square rods |
2 mm to 300 mm solid sheet/block thickness |
standard sizes up to 3050 x 2030 mm |
over 40 standard colors |
good resistance to diluted acids and to alkalis, limited resistance to organic solvents |
very easy to work, similar to hardwood |
easy to thermoform over a wide range of conditions |
easily and firmly bonded, e.g. with reaction adhesives |
burns more or less like hardwood; very little smoke generation; combustion gases are non-toxic and non-corrosive |
max. service temperature approx. 80 °C |