Good price 0.20 micron hydrophobic PTFE membrane sterile air filter
China good price 0.20 micron hydrophobic PTFE membrane sterile air filter
PTFE Membrane Filter Cartridges are sterilizing grade filters manufactured with highly retentive hydrophobic polytetrafluoroethylene (PTFE) membrane, provides excellent chemical compatibility and superior flow per surface area as compared to other membrane cartridges.
These cartridges are designed for critical filtration of compressed air/gas, vent air and aggressive solvents. Each cartridge is individually tested using bubble point method before it is released from manufacture.
Features and Benefits of PTFE filter cartridge
- Naturally hydrophobic PTFE membrane with excellent porosity, high flow rate
- Absolute rating, filtration efficiency≥99.99%, Up to 0.01 micron in gas sterile filtration
- Low pressure drop and long service life
- Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
- High temperature endurance performance
- 100% integrity tested before final assembly
Typical applications of PTFE filter cartridge
- Compressed air, CO2 line sterile filtration;
- Tank vent, Fermentation air;
- Air filtration in aseptic packaging;
- Aggressive acids, Bases, Solvents;
- Photoresists, Etch Solutions;
| Specifications | ||||||
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, , etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75'') | ||||
| Inner Diameter | 33mm(1.30'') | |||||
| Length(based on DOE end caps) | 10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10'' | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature: | 90℃ (194℉) at P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) | |||||
| Cartridge Safety | Endotoxin: | <0.25 EU/ml | ||||
| Extractables: | 0.03g / 10" | |||||
Typical air flow rate @ 25 ℃ (10"):
| Ordering information: | ||||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
P -PHARMACEUTICAL
F- FOOD & BEVERAGE | IPF | 010-0.1um | AA- DOE | 10-10" | S-silicone; N-nitrile | |
| 020-0.2um | CN-226/FIN | 20-20" | E-epdm ; T- (encaptulated) | |||
| 045-0.45um | BN-222/FIN | 30-30" | V-viton | |||
| BF-222/ FLAT SEAL | 40-40" | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5" | Pharmaceutical grade; Micron:0.45um; Length:10" ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Our service
1,24-hour Response
We responds any request from our clients within 24 hours, saving your time and labor.
2,Supporting System
The system consists of claims systems, technical support system, inquiry system and ordering following system. The system will provide after-sales service in full range.
3,Free Training
We provide free training to all of our clients and distributors. The training will give you ample knowledge of our product, and make it easy for your work.
4,Free Storage Area
We are providing free storage area to our client,to achieve mix loading purposes.
1 How can we get the quotation of flter cartridges
Kindly please let us know the specifications,such as the material,length,micron,adapter,apply in which industry.....
2What's the minimal quantity requested?
We do not the requirement on teh minimal demand.Thank you.
3How long about your delivery ?
The order is always arranged in 10 working days as soon as receiving the deposit or payment
contact us
EMail:yml
(at)tsjmlc.com
Best wishes!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier