Vbolt Membrane Distillation System adopts a kind of simple structure, utilize high speed centrifugation to separate water content from waste oil, and thin film evaporator to get ride of light components. Realize oil gases dissociation via advanced membrane distillation system combining with continuously assistant heating source. By catalytic cracking under different temperature collects base oil fragments.
used engine oil | pyrolysis oil | tyre oil | black oil | heavy oil |
crude oil | motor oil | car oil | plastic oil | used industrial oil |
1) VBT-DB High Standard Used Motor Oil Recycling Regeneration Plant can recycle many kinds of waste oils,such as used gasoline engine oil,no matter mineral oil or synthetic oil, used motor motor oil, other used transmission oil,waste hydraulic oil and other lubricant oil to clean base oil,like SN150,SN300,SN350,SN500.
2)The recovery rate of machine is 85-95%.
3)one kind of catalyst needed only, percentage:1%-3%,through catalyzing,the harmful substances are selectively processed.For example, polymerization, shielding, passivation effect and discharged as residues. So as to remove the unstable factors of the waste lubricating oil, make it became qualified lubric-environmental friendly used motor oil recycling decolorizing regeneration unitating base oil.Recycled oil quality is good, color is about No.0.5-1 without bad smell.
4)Environmentally friendly, without secondary pollution. Certification: ISO9001:2008, SGS, CE,BV.
Model Data | VBT-DB-4 | |
Working capacity | 8TPD | |
Dimension | 13*4*6M | |
Gross weight | 11T | |
Number of burners | 3 | |
Fuel supply | Light diesel fuels/Kerosenen/Heavy fuel oil/Environmental oil/Waste lube oil for burning(Molten salt furnace available) | |
Heating Method | Natural gas/Gasoil/Coal/Power | |
Combustion machine | 300.000Kcal | |
Fuel consume | 15.0-20.0kg/hr | |
Natural gas consume | 6.0-34.8Nm3/h | |
Power consume(Combustion machine) | 45KW | |
Power consume(Electric heating) | 83KW | |
Cooling mode | Water cooling + air cooling, freezing liquid | |
Cooling water volume (T) | 102T | |
Rate of recovery | 83%-93% | |
Heat exchange area | 89㎡ | |
Working temperature | (-10℃-360℃) | |
Working noise | ≤60dB | |
Voltage | 220/380V(3PHASE) | |
Container specification | 40HQ | |
number of Container | 1Container | |
The waste oil of 1400 PPM sulfur content can be distilled with a desulfurizing agent and a catalyst to obtain a waste oil of 100-150 ppm sulfur content. The original cetane number is 45. After distillation, you can get cetane number of 51~55. |