USB | 4*USB 2.0 |
USB | 1*Giga LAN |
USB | Max 1920*1280 |
Interactive with Lambda | PHOENIX Bus terminal |
Tool Magazine | Linear type, Disk type, Servo type |
Tool Measurement | Auto and Manual measurement |
Tool Calibration | Fixed tool calibration, Mobile tool calibration, First calibration & Calibration after tool change |
Tool Setting Mode | Support automatic and manual tool setting |
Tool Setting Type | Fixed tool calibration, floating tool calibration, first tool calibration/tool calibration after tool change |
Compensation Type | Workpiece compensation, Screw error compensation, Backlash compensation, AQE compensation, Tool compensation |
Toolpath File | *.G;*.NC;*.UG;*.DEMO;*.ISO;*.ENG;*.CUT;*.DXF;*.PLT;*.TXT |
WCS Setting | Supporting WCS G54-G59 and origin saving |
Processing Technology | Multi-tasking, Array function, Mirror & Rotate, Multi-layer machining, Cycle machining |
Convenient Operation | Handwheel guide, Breakpoint resume, Tool selection |
Interpolation Algorithms | S-type, LEP, Acceleration T type algorithms |
Software Language | Chinese,English |
Sofeware Alarms | Alarms of program error, operation error, over-travel error, PLC error, and IO communication error,Mounting Dimension |
1.USB | Used to transmit data with a USB flash disk |
2.LAN | Transmission rate is 100Mbps |
3.24V DC power | Used to connect to 24V power supply |
4.LED indicator | Used to indicate the current status of the system |
2Hz flicker frequency shows good communication | |
0.33Hz flicker frequency shows power disconnection | |
10Hz flicker frequency shows exception | |
5.Lambda terminal board | Used to connect to Lambda terminal board |
6.Panel | Used to connect to operating panels |
7.VGA,Display screen | Used to connect to display screen |