■ This series of products, the base below 400W is relatively shallow, the weight is lighter, the power is larger.
■ Due to the new generation of Class D technology and accelerated instantaneous response technology, the series does not overheat during operation and does not require large and heavy radiators.
■ It has full electronic protection without relay, main fuse and independent channel fuse, power amplifier on the input signal automatically weakened, short circuit protection, thermal overload protector, intelligent limiter, advanced transient response.■ Sensitive overheat management system can work well at very high temperatures, and this unique circuit monitors the amplifier's temperature in real time, reducing output power rather than closing the circuit when safe operation is compromised.
■ Above 400W, 2U adopts secondary H-class circuit, 3U adopts tertiary H-class circuit, improving equipment conversion efficiency and prevent overheating.
■ Short circuit protection: Prevents work under dangerous load and short circuit between output terminal and ground.
■ Thermal protection: It automatically regulates the internal temperature of the amplifier so that it is always protected within a large limited heat range.When the internal temperature reaches 90℃, the amplifier will automatically cut off the connection to the speaker.
■ Automatic recovery system: When the temperature of the amplifier returns to 80℃, it will automatically return to normal operation.
■ Dc output protection.
■ Built-in limiter: This is a very effective way to prevent speaker damage. It is equipped with a nonlinear comparator. Once the signal is reduced, you can adjust the operating state of the amplifier circuit until the wave elimination is eliminated.