Grade | Fusil 150 | Fusil 200 | Fusil 200P | Fusil 200V | Fusil 300 | Fusil 380 | |||||
Form | White Power | White Power | White Power | White Power | White Power | White Power | |||||
BET surface Area m2/g | 150±10 | 200±15 | 200±25 | 200±15 | 300±20 | 380±20 | |||||
PH value | 3.8-4.2 | 3.8-4.2 | 3.6-4.3 | 3.6-4.3 | 3.8-4.2 | ||||||
Heating loss(105℃,2h) wt% | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | |||||
Ignition loss (1000℃,2h) wt% | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 | |||||
SiO2 content (%) | ≥99.8 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | |||||
Bulk Density (g/l) | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 |
Equivalent Grade | DEGUSSA | Aerosil 150 | Aerosil 200 | Aerosil 200P | Aerosil 200 | Aerosil 300 | Aerosil 380 |
CABOT | LM-150 LM-150D | M-5 M-7D | M-5P | M-5 M-7D | H-5 | EH-5 | |
WACKER | V15 V15A | N20 | N20P | N20 | T30 | T40 | |
YOKYYAMA | QS10 | QS102 | / | QS102 | QS30 | QS40 | |
OIC | K150 | K200 | / | K200 | K300 | K400 |
Application | Primary Performance Criteria | Suggest Grade | Suggest Addition (%) | ||
Rubber / Synthetic Rubber | Reinforcement | Fusil 200, Fusil 200V, Fusil 380 | 5.0-30 | ||
Pharmaceutical | Thickening; Thixotropy; Anti-settling; | Fusil 200P | 1.0-5.0 | ||
HTV Silicone Rubber | Reinforcement; Elongation Resistance; Ease of Compounding | Fusil 150, Fusil 200, Fusil 200V, Fusil 300, Fusil 380 | 15-50 | ||
RTV Silicone Rubber | RTV-silicone sealant (1 component) | Reinforcement; Thixotropy, Rheology control, dispersability | Fusil 150, Fusil 200, Fusil 200V, Fusil 300, Fusil 380 | 3.0-30 | |
RTV-molding compound | 3.0-30 | ||||
Liquid Silicone Rubber | 15-35 | ||||
Adhesive | Polychloroprene | Thickening; Thixotropy; Anti-settling; Sag Resistance; Extrusion Rate; Rheology Control | Fusil 200, Fusil 200V | 1.0-2.0 | |
Extrusion Rate | |||||
Latex | |||||
PVC | Plastisol | Thickening; Thixotropy; Anti-settling; Free-flow; Insulation | Fusil 200 | 0.3-2.5 | |
Organosol | |||||
Plastisol PVC Mixture | 0.1-1 | ||||
Cable Compound | 1.0-2.0 | ||||
Membrane | 0.1-1 | ||||
Unsaturated Polyester Resin | Laminating Resin | Thickening; Thixotropy; Anti-settling; | Fusil 200,Fusil 300, Fusil 380 | 0.8~1.5 | |
Gel coating | 2.0-3.0 | ||||
Grouting mixture | 0.5-2.0 | ||||
Print Ink | Relief Printing | Thickening; Thixotropy; Anti-settling; Sag Resistance; Rheology Control | Fusil 200, Fusil 300, Fusil 380 | 0.5-2.0 | |
Intaglio Printing | |||||
Hectograph | Fusil 150, Fusil 200, Fusil 300,Fusil 380 | 0.5~2.5 | |||
Insulating Glue | Thickening; Thixotropy; | Fusil 200, Fusil 200V | 5.0-10 |