Good Price 10V Digital Volt Meter Low Volt Dc Meter Panel Dc Volt Meter
Model | Alarm | Analog | Communication | Measurement range | Code |
DP4-AV/DV/DA/AA(D) | No | No | No |
AV/DV: 0.2/2/20(10)/200(100)/600V DA/AA:2mA/20mA/200mA2 AACT:AC 5A (secondary transformer ratio) DACT:DC shunt 75mV |
A0800DP03 |
DP4-DA/AACT(D) | No | No | No | A0800DP03 | |
DP4I-AV/DV/DA/AA(D) | No | 4-20mA | No | A0970DP03 | |
DP4I-DA/AACT(D) | No | 4-20mA | No | A0970DP03 | |
DP4-TAV/DV/DA/AA(D) | No | No | RS485 | A1100DP03 | |
DP4-TDA/AACT(D) | No | No | RS485 | A1100DP03 | |
DP4I-TAV/DV/DA/AA(D) | No | 4-20mA | RS485 | A1300DP04 | |
DP4I-TDA/AACT(D) | No | 4-20mA | RS485 | A1300DP04 | |
DP4-PRAV/DV/DA/AA(D) |
High/Low limit, middle value |
No | No |
AV/DV: 0.2/2/20(10)/200(100)/600V DA/AA:2mA/20mA/200mA2 AACT:AC 5A (secondary transformer ratio) DACT:DC shunt 75mV |
A1200DP03 |
DP4-PRDA/AACT(D) |
High/Low limit, middle value |
No | No | A1200DP03 | |
DP4I-PRAV/DV/DA/AA(D) |
High/Low limit, middle value |
4-20mA | No | A1400DP03 | |
DP4I-PRDA/AACT(D) |
High/Low limit, middle value |
4-20mA | No | A1400DP03 | |
DP4-PRTAV/DV/DA/AA(D) |
High/Low limit, middle value |
No | RS485 | A1500DP03 | |
DP4-PRTDA/AACT(D) |
High/Low limit, middle value |
No | RS485 | A1500DP03 | |
DP4I-PRTAV/DV/DA/AA(D) |
High/Low limit, middle value |
4-20mA | RS485 | A1800DP04 | |
DP4I-PRTDA/AACT(D) |
High/Low limit, middle value |
4-20mA | RS485 | A1800DP04 |
Input signal |
Input resistance |
See range description | Power Supply | Voltage |
100~240V AC/DC 50/60Hz |
Overload capacity |
Max 1.2 times of rated range | Power consumption | ≤5W | ||
Accuracy |
Below 200V/A:0.1%FS Over 200V/A:0.2%FS |
Protection level |
Panel | IP54 | |
Casing | - | ||||
Refresh rate |
2.5~10times/sor51.2us/ times |
||||
Analog | Output | 4~20mA | Environment |
Work environment |
0~50℃ <85%RH |
Load | 600Ω max |
Storage environment |
-20~60℃ <85%RH | ||
Output accuracy |
0.5%FS or 0.2%FS | Structure | Vibration,stack |
10~55Hz X\Y\Z 0.75mm |
|
Resolution | 0.01mA 12 digits DA | Screw torque | 0.74n.m~0.9n.m | ||
Relay output | Load | 3A/250V AC | Safety |
Dielectric strength |
2000V AC 50/60Hz 1 minute |
Electrical | 100,000 times |
Insulation resistance |
100MΩ DC 500V | ||
Michanical | 1 million times | EMC | ESD | Level 3 | |
Communication | Protocol | RS-485 ModBUS-RTU |
Pulse trainanti-interference |
Level 4 each mode±4000VP-P |
|
Baud rate | 4800bps,9600bps | Lightning surge | Level 3 N-L ±2000V | ||
Frequency drop | Level 3 |
Type | Measurement Range | Resolution | Input Impedance | Accuracy Level |
Voltage Signal | 20mV | 0.001mV | 1MΩ | ±0.1%F.S ±3Digits |
200mV | 0.01mV | 1MΩ | ±0.1%F.S ±3Digits | |
2V | 0.1mV | 1.2MΩ | ±0.1%F.S ±3Digits | |
20V | 1mV | AV1.2MΩ/DV2MΩ | ±0.1%F.S ±3Digits | |
200V | 10mV | 12MΩ | ±0.1%F.S ±3Digits | |
600V | 100mV | 12MΩ | ±0.2%F.S ±3Digits | |
Current Signal | 2mA | 10nA | 200Ω | ±0.1%F.S ±3Digits |
20mA | 1uA | 20Ω | ±0.1%F.S ±3Digits | |
200mA | 10uA | 2Ω | ±0.1%F.S ±3Digits | |
2A | 100uA | 0.1Ω | ±0.1%F.S ±3Digits | |
Above AC 5A | 1mA | 2mΩ | ±0.2%F.S ±3Digits | |
Above DC 2A | 1mA | >1MΩ | ±0.2%F.S ±3Digits |
FAQ
Q1.Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2.What is your terms of payment?
Usually,we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, full payment before delivery the goods.
Q3.What is the lead time?
For standard models, lead time is about 3~5 days after order confirmed and payment received.
For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.
Q4.What is your terms of packing?
Under TOKY brand, the standard packing is 1pc item in a colour box or brown inner box, then into standard export carton.
For OEM order, usually 1pc item in a brown inner box, then into standard export carton.
Q5.What is your terms of delivery?
We accept EXW,FOB,CIF,etc. You can choose the one which is the most convenient or cost effective for you.
Q6.How to solve the quality problems after sales?
Take photos or videos of the problems and send to us.
We will make a satisfied solution for you within 24 hours after we confirm the problems.
Q7.Do you have any MOQ limit for the order?
Low MOQ, 1pc for sample checking is available.
Q8.Is it OK to print my logo on the product?
Yes, OEM service is available.
Please confirm with our sales team formally before production and confirm the design firstly based on our sample.
Q9.Are you manufacturer or trading company?
We are manufacturer for over 30 years. Welcome to visit our factory at anytime.