Appearance1060 High Aluminium content Sheet/Coil/Strip for Sale
The 1060 aluminum coil is formed by adding a small amount of copper to pure aluminum, which has excellent forming processing characteristics, high corrosion resistance, good weldability and electrical conductivity. 1060 aluminum coil is widely used in products with low strength requirements, such as chemical equipment, sheet metal processing parts, deep drawing or spinning concave vessels, welded parts, heat exchangers, clock surfaces and discs, nameplates, kitchen utensils, decorations, Reflective appliances, etc. |
![]() |
|
![]() |
Mechanical properties | |
Tensile strength σb (MPa): | 95~12 | |
Conditional yield strength σ0.2 (MPa): | ≥ 75 | |
Note: Longitudinal mechanical properties of pipe at room temperature
Sample size: all wall thickness |
Specification | |||
Aluminum Plate: |
1000*2000, 1200*2400, 1220*2440, 1250*2500, 1500*3000, thickness 0.1mm-120mm |
Product Detail | |
Aluminum Coil: | width 800mm-1200mm, thickness 0.02mm-2mm |
Product category and product name: |
1060 aluminum coil |
Aluminum Strip: | width 50mm-800mm, thickness 0.02mm-2mm |
Production s ize range: |
Thickness T=0.3-6.0mm (Tolerance:+/-0.02mm), width W=20-1300mm, length L=100-Cmm (Tolerance:+/-1mm) |
Aluminum Round: | thickness 0.1mm-3mm, diameter 50mm-500mm |
Implementation standards: |
GB/T3190-1996 |
Product performance description | Main purpose description | ||
Features: | Used for: | ||
The 1060 aluminum coil has good elongation and tensile strength, and is fully capable of meeting the conventional processing requirements (stamping, drawing) and high moldability. It is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but its strength is low, heat treatment can not enhance the machinability; gas welding, hydrogen atom welding and contact welding are not easy to braze; Pressure processing and extension, bending. | 1060 aluminum coils are commonly used in signboards, billboards, building exterior decoration, bus body, high-rise and factory wall decoration, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, sheet metal parts, deep drawing or spinning Indented vessels, welded parts, heat exchangers, clock surfaces and discs, nameplates, kitchen utensils, decorations, reflective appliances, etc. | ||
Chemical Composition(%) | |||
Aluminum (Al) | 99.6 | ||
Silicon (Si) | 0.25 | ||
Copper (Cu) | 0.05 | ||
Magnesium (Mg) | 0.03 | ||
Zinc (Zn) | 0.05 | ||
Manganese (Mn) | 0.03 | ||
Titanium (Ti) | 0.03 | ||
Vanadium (V) | 0.05 | ||
Iron (Fe) | 0.35 | ||
single | 0.03 | ||
Surface Condition | Definition | Use | |
O state |
Fully annealed, suitable for full annealing to obtain the lowest strength processed product. |
Deep drawing or spinning concave ware | |
H12, H22 |
H12: First intermediate annealing and then rolling back into a 1/4 hard processed product. |
Welding parts, heat exchangers, printing plates, nameplates and reflective equipment |
|
H22: Direct annealing to a 1/4 hard product. | |||
H14, H24 |
H14: First intermediate annealing and then rolling back into a 1/4 hard processed product. |
Extrusion coils for food, chemical and brewing industries, various hoses, fireworks powder |
|
H24: Direct annealing to a 1/4 hard product. | |||
H16, H26 |
H16: First intermediate annealing and then rolling back into a 1/4 hard processed product. |
Non-heat treated reinforced material | |
H26: Direct annealing to a 1/4 hard product. | |||
H18, H32, T6 | Hard, suitable for work hardening products. |
Aircraft fuel tanks and conduits, welding wire, rivets, ship structural parts |
|
Theoretical weight calculation formula Weight (Kg) = thickness (mm) * width (M) * length (M) * density value | |||
Aluminum density | Aluminum species | 1.0*1M*2M weight (kg) | 1.0*4*8’ weight (kg) |
2.71 | 1100, 1060, 1050, 1070 | 5.42 | 8.067 |
2.73 | 3003, 5052, 6061, 6063, 7075 | 6.55 | 8.127 |
According to the alloy composition is divided into:
industrial pure aluminum, it is A series that aluminum content is the most.Purity can reach more than 99.00%.Because do not contain other technical elements, so the production process is single, the price is relatively cheap.
|
This iss a series currently the most commonly used in conventional industry.
|
||
could be called antirust aluminum plate ,And 3000 series of aluminum plate production technology is relatively excellent in China.3000 series aluminum plate is made up of manganese element as the main alloy, is between 1.0 to 1.5. Is a good series has antirust function.Conventional application in air conditioning, refrigerator, humid environments, such as car, price is higher than 1000 series, is a relatively commonalloy series.
|
Conventional application in air conditioning, refrigerator, humid environments, such as car, price is higher than 1000 series, is a relatively common alloy series.
|
||
Belong to the more commonly used 5000 series aluminum alloy aluminum plate series, the main elements for magnesium, magnesium content between 3-5%.And could be called aluminum magnesium alloys.Main characteristics of low density, high tensile strength, elongation rate is high.Under the same area of the weight of the aluminum magnesium alloy is lower than other series. Processing technology for continuous casting and rolling, belongs to the series of hot rolled aluminum plate can do oxidation processing.5000 series aluminium plate in China belong to a mature aluminum plate series in China.
|
Often used in aviation, such as aircraft fuel tank.Are widely used in the conventional industry.
|
1060 aluminum coils are commonly used in signboards, billboards, building exterior decoration, bus body, high-rise and factory wall decoration, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, sheet metal parts, deep drawing or spinning Indented vessels, welded parts, heat exchangers, clock surfaces and discs, nameplates, kitchen utensils, decorations, reflective appliances, etc.
Rapid annealing: heating temperature 350 ~ 410 ° C; with the effective thickness of the material, the holding time is between 30 ~ 120min; air or water cooled. High temperature annealing: heating temperature 350 ~ 500 ° C; finished product thickness ≥ 6mm, holding time is 10 ~ 30min, <6mm, heat through; air cooling. Low temperature annealing: heating temperature 150 ~ 250 ° C; holding time is 2 ~ 3h; air or water cooling.