Gold Melting Furnace 1 Kilo 2048F Melt Scrap Silver-Copper Make Bars
JC-K-220-2 Series Jiuchen Melting Furnace is equipped with Thermocouple, SSR, AI Temp-erature Controller. It is specially designed and constructed for melting metals for casting and alloying of metal up to 1200oC.
JC-K-220-2 Gold Meter is equipped with 1kg, 2kg,3kg capacity graphite crucible for melting
1kg Capacity: 821g (26.4 ozt. 14KY gold)
2kg Capacity: 53 ozt. 14KY gold
3kg Capacity: 90 ozt. 14KY gold Gold: 2799g (90 troy oz.)
This crucible has a groove in the rim to accept the specially designed crucible tongs for added safety.
Temperature range is from 0 Degrees Fahrenheit to 2192 Degrees Fahrenheit (1200 Degrees Celsius) all Digitally controlled by you. It takes 15-20 Minutes to fully melt your metal depending on the form of material. Shot or small parts melt faster than large bars or blocks.
One Furnaces Unit delivery with:
Model JC-K-220-2(220V 2kw) Red,Blue ,Gray color is optional
Graphite stirring rod
Graphite Crucible (1kg)
Safety Glasses
Replacement fuse set
Insulating heat glove
Instruction manual
Advantages of This Product:
1. Light weight and small volume;
2. High efficiency of refining;
3. Easy installation and operation;
4. Fast speed of raising temperature, the temperature is constant;
5.Safe and environment-friendly operation;
6.Complete Protection:Equipped with over-voltage,over-current,over-heat,water shortage device which control and protect automatically;
7.Insulated lid holds heat in and keeps oxygen out for a cleaner melt.
8. You can melt pure silver & gold or alloys such as sterling silver, 14k gold 18k gold up to pure.
9. It takes 4-5 Minutes to first warm up depending on the metal your melting and 11-15 minutes to fully melt your metal depending on the form of material. Shot or small parts melt faster than large bars or blocks.
Difference Feature JIUCHEN with Other Similar Furnace
Items | JC Electric Furnace | Other Similar Furnace |
Furnace chamber | Adopts new advanced SIC material with no crack no distortion under normal temp 1-1200 Degrees Celsius,which prevents disadvantage of short work life with tranditional ceramic fiber, quartz chambers. | Traditional chamber material:ceramic fiber, quartz with easy crack and distort after use 2-3 times,which easily lead to short circuit and reduce work life. |
Heating Coil | Material: Fe-Cr-Ni alloys Limited test temp up to 1600°C,make sure long continues continuous work time under normal 1200°C,which effectly extend furnace work life | Easy to crack after use 2-3times and lead to be out of work,it is very complicated process if replace coil singly,also many end users unable to replace it successfully by themselves. |
Heating Speed | JC-K-220-1(220V1Kw) 25-30Mins JC-K-220-1(220V 2Kw) 15-20Mins | 25-45mins: Reheat:15-30mins Then need 10-15mins to complete finish the melting. |
Working temp | 1-1200 Degrees Celsius | 1-1150 Degrees Celsius |
Gold Melting Furnace Operating Instruction
The furnace has two on/off switches: the GREEN switch turns on the temperature thermostat allowing you to set the desired melting temperature.
The RED switch turns on the heating element to start the melting process.
The thermostat has two digital read-outs: the bottom readout (SV) displays the setting you enter into the furnace. The top read-out (PV) displays the actual temperature inside the crucible during operation.
To set the desired melting temperature, turn on green on/off switch. Wait a few seconds; the bottom (SV) readout should show the default temperature setting of 1950°F.
To change the temperature setting, simply press the left arrow key to move the cursor to the proper desired digit and press the up or down keys to adjust it up or down. Adjust each digit to the desired setting.
When you are ready, place the metal pieces or grain in the crucible and set the crucible in the furnace. Close the lid.
Press the red button to start the melting process.
When the metal is molten and has reached casting temperature, turn off the red switch. Open the lid and pour the metal into your prepared flask.
Gold Melting Furnace Package Related Certificate
Related Certificate
Gold Melting Machine Shipping
We can accept T/T,Paypal,Western Union,Escrow,the best and fast way is Paypal.
We choose DHL/Fedex/UPS usually takes about 3-5 working days to the destination,
We will send the goods within 3 working days after the full payment has been confirmed.
Warranty and Return:
All the products have been tested before ship out.
All products electrical parts have 1 year warranty,including temperature controller,relay, thermocouple,heating elements have 6 months warranty,including chamber,heating coil etc.
If there is no man-made problems,we will replace or repair for you freely.
Contact Way
Contact Person:Ms.Emily Peng
Tel:86-13953356036/86-533-3593344
Skype:emilypeng2010