Glass bar softening furnace

The traditional glass softening furnace has high energy consumption, low power, high efficiency, and the labor intensity of workers is relatively high, especially in summer, there is no way to operate it, and the energy waste is more than 30%.
The new rotary glass heating and softening furnace has the advantages of low energy consumption, high efficiency, low labor intensity, etc., which greatly reduces the cost of glass softening.
1,Working principle: Put the pre-cut optical glass on the support after dust removal, and then send it into the heating zone by the rotating platform. The heating zone is an annular channel. Control the softening degree of the glass rod by adjusting the temperature of the heating zone and the rotation speed of the platform;
2,Power Control:The new rotary glass heating and softening furnace adopts intelligent temperature control instrument, uses PID to automatically control the temperature, can be triggered by thyristor, and can be adjusted arbitrarily below the rated power. Good precision, stable control, and segmented control, so that the glass is gently heated
3,Insulation aspect The new rotary glass heating and softening furnace adopts advanced forming and fixed insulation materials, which is small in size and has good insulation effect.
4,Efficiency and work intensity of workers:The traditional glass softening furnace is an open type with large heat radiation. Workers need to walk back and forth, and the work intensity is high. The new rotary glass heating and softening furnace adopts a self-developed mechanical rotating platform to send glass components into the furnace. Workers only need to arrange the glass rods on the conveyor rack in an orderly manner, or place them by robots. This greatly reduces labor intensity
5,Quality:In the traditional glass softening furnace, the heating time is judged by human experience based on experience, so it is difficult to control the increase in product rejection rate due to insufficient heating time or overheating. Moreover, a section of material at the heating tail cannot enter the furnace, so it can only be directly treated as waste. After the glass is cut into sections, an inspection can be performed. The glass sections with burrs and bubbles are marked and placed in a softening furnace for softening, which can greatly increase the yield.
The new type of rotary glass heating and softening furnace adopts rotary circulation heating. The heating degree of the glass rod is controlled by controlling the rotation speed and heating power of the softening furnace. Good, and greatly reduce costs.