High Temperature Frit Glass Low-Temperature Flux
Enamel Glaze Producing Furnace
Discharge from Bottom
1700.C Frit Glass Low-Temperature Flux Enamel Glaze Producing Furnace
No. | Item | Specification |
1 | Product Name | 1700C crucible glass melting furnace |
2 | Max. Temperature | 1700°C |
3 | Working temperature | 1600°C |
4 | Heating element | right -angle MoSi2 rod |
5 | Special part | A hole on furnace top and bottom |
6 | Furnace size | According to the tunnel crucible |
7 | Crucible model | G02 (14L water ) or other model |
8 | Spare part | extra crucible ; stopper rods ; bottom tubes |
9 | Crucible furnace includes | 1set of furnace ; 1 pc of crucible |
High temperature frit glass enamel glaze furnace introduction :
This frit glass enamel glaze is designed with separate furnace chamber and electronic control system.
In addition, according to customer requirements,a removable mixing system can be installed on the top of the furnace , which can automatically rise, fall and rotate ,can make the mixed material more evenly in special experiments
High temperature frit glass enamel glazefurnace function:
Mainly used in ceramics, glass, enamel and other industries to prepare frit,glass low-temperature flux , enamel glaze and bonding agent in the laboratory.
High temperature frit furnace (glass melting furnace) operation:
Place a funnel crucible in this vertical crucible glass melting furnace ,and put into mixed grit to the crucible directly .A round port at the furnace bottom for liquid flow out, a stopper will seal this port when needed . When furnace is heated ,the stopper sealed the port very well to avoid melting material leak ,after melting ,lift the stopper and leak melted material .
Step 1: Put stopper into the discharge port
Step 2: Install discharge pipe at the furnace bottom
Step 3: loading the raw mateial to the furnace crucible
High temperature frit,glass,enamel glaze furnace chamber:
Matched high purity alumina crucible :
Lab furnace will be packed by plastic , foam and plywood case outside .
⇒
step 1: packed by plastic Step 2: foam-filled ⇓
⇐
step 4: loading Step 3: packed by plywood case outside
Our Services
· Sutong can load container at Qingdao, Tianjin, Shanghai etc.
· Sutong provide shipping method: Courier service, Air transport, Sea transport
· Sutong accept order: Full container cargo load, LCL and sample order
· Sutong provide service:EX-WORK, FOB, CIF, C&F, Door to Door etc
· Sutong has complete quality control system and after-sale service
Payment
L/C T/T, West union,etc.
Warranty
· Our products are warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost.
· This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.
· Replacement will be shipped to you after photo or other evidence are provided and investigated