Contact me please if you need the user manual .
Features
1.Embedded MIPS1004Kc (880 MHz, Dual-Core)
32 KB I-Cache and 32 KB D-Cache per core
256 KB L2 Cache (shared by Dual-Core
SMP capable
Single processor operation configurable
2.Gigabit Switch
5 ports with full-line rate
5-port 10/100/1000Mbps MDI transceivers
3.One RGMII/MII interface
4.16-bit DDR2/3 up to 256/512 Mbytes
5.SPI(2 chip select), NAND Flash(SLC), SDXC,eMMC(4 bits)
6.USB3 x 1+ USB2 x 1 or USB2 x 2 (all host)
7.PCIe host x 3
8.I2C, UART Lite x 3, JTAG, MDC, MDIO, GPIO
9.VoIP support (I2S, PCM)
10.Audio interface (SPDIF-Tx, I2S, PCM)
11.Deliver the superb Samba performance via USB2.0/USB 3.0/SD-XC
12.HW storage accelerator
13.HW NAT
2Gbps wired speed
L2 bridge
IPv4 routing, NAT, NAPT
IPv6 routing, DS-Lite, 6RD, 6to4
14.HW QoS
16 hardware queues to guarantee the min/max bandwidth of each flow.
Seamlessly co-work with HW NAT engine.
2Gbps wired speed.
15.HW Crypto
16.Deliver 400~500 Mbps IPSec throughput
17.Green
Intelligent Clock Scaling (exclusive)
DDR2/3: ODT off, Self-refresh mode
18.Firmware: Linux 2.6 SDK, OpenWRT
19.RGMII iNIC Driver: Linux 2.4/2.6