Tech parameters | Description | ||
Up-link interface | PON Quantity | 1PCS GPON PON | |
PON interface receiving rate | 2.488 Gbits/s | ||
PON interface Transmitting rate | 1.244 Gbits/s | ||
Optical power | 0~4 dBm | ||
Sensitivity | -28 dBm | ||
safety | ONU authentication mechanism | ||
Down-link interface | Fiber type | Single mode single fiber, max 20km | |
Wavelength(nm) | TX 1310nm,RX 1490nm | ||
Fiber Port | SC/PC SC/UPC SC/APC | ||
Ethernet Port (Option 1) | 3PCS*10/100M with auto-negotiation 1PCS*10/100/1000M with auto-negotiation | ||
Ethernet Port (Option 2) | 4PCS*10/100M with auto-negotiation | ||
Power Supply | 12V 1A | ||
Power | ≤5W | ||
Operating temperature | -5~+55℃ | ||
Humidity | 10~85%(non-condensation) | ||
Storage temperature | -30~+70℃ |
WIFI characteristics | ||
Standard | IEEE802.11b/g/n | |
Frequency | 2.4~2.4835GHz | |
Transmission speed | IEEE 802.11b :max11Mbps IEEE 802.11g: max54Mbps IEEE 802.11n:max 300Mbps | |
Channel number | 2.4GHz :13 | |
Spread-spectrum Technique | DSSS(Direct sequence spread spectrum) | |
Data Modulation | DBPSK,DQPSK,CCK QPSK, and 16-QAM/64-QAM | |
Multiple encryption methods | WFA,WPA,WPA2,WAPI | |
Antenna | 2T2R Mode external antennas 5DBI Gain per pcs MIMO: 2*2 |
CATV Technical features | ||
Tech features | description | |
Optical wavelength | 1100~1650nm(Dual Fiber,NO PWDM) 1540~1560nm(Single Fiber,internal PWDM component) | |
Optical input range | 0~-15 DBm | |
Optical return loss | ≥45 DB | |
Bandwidth | 45~1000 MHz | |
Flatness | ±1.5DB | |
RF output level | The default:75±5dBuV@155MHZ | |
AGC control range | 0~14 DBm | |
RF Output return loss | ≥14 DB | |
Output impedance | 75Ω | |
MER | >33DB @251MHZ | |
CNR | ≥43 DB | |
CTB | ≥54 DB | |
CSO | ≥54 DB |