Welcome to TradeChina
Generator Auto Key Start Control Manul Panel 501K Starting Modeul Controller DSE501K
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo wig Trading Co., Ltd
China - Hangzhou
Manufacturer
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
51-100 people
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
BRC
Product Specifications
--Product Description
Specification
Controll Funtion | Protection Funtion | Data display |
Emergency Stop | Low-Lub oil pressure | Speed |
Manual Start/stop | Charge Failure | Voltage of battery |
Distance Start/Stop | Emergency STOP | Lub oil pressure |
Preheat Control | High speed start/shop failure | Operation time |
Stop/idle control | High Speed/Start and stop failure | Voltage/Current |
Product Description
Operation of the module DEEP SEA CONTROLLER 501K is via a three position key switch mounted on the front panel with STOP(O), RUN(I) and START(II) positions. In the 'O' position the DC provide is removed from the module and the run relay and alarm output are de-energised. If the switch is turned to the 'I' position the module is powered up and the run relay is energised, activating the engine fuel/ignition system and the protection hold-off timer is initiated. If the switch is moved to the 'II' position and held against the spring return, a positive provide is applied to the relevant output terminal and on to the starter motor. Once the engine has started the switch should be released and allowed to return to the 'I' position.
DSE DSE501K Deep Sea Generator Controller Operation of any of the following alarms; Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown, Overspeed (Optional), will cause the run relay to de-energise. This will remove the fuel/ignition provide from the engine and bring it to rest. The alarm output will be activated giving a positive DC output.
Each alarm channel has it's own LED indicator and once activated no further alarm conditions will be accepted. The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the 'O' position.
Each alarm channel has it's own LED indicator and once activated no further alarm conditions will be accepted. The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the 'O' position.
Overspeed Protection (Optional) is achieved by the fitment of an additional PCB in the module. This provides integral overspeed protection derived from either the generator HZ output or the engine magnetic pick-up (specified on ordering). The overspeed circuit continuously monitors the engine speed and will shut down the engine immediately if a pre-set speed level is exceeded.
This trip level is adjustable from 90% to 130% of full rated speed and is suitable of both 50Hz or 60Hz systems.
This trip level is adjustable from 90% to 130% of full rated speed and is suitable of both 50Hz or 60Hz systems.
During engine cranking and for a short time afterwards the protection hold-off timer is active and the relevant alarms inputs are inhibited. This enables the engine to start and achieve normal running conditions. Once the timer has expired the inputs are enabled providing normal protection from the module.
Charge Failure warning is also provided by monitoring the WL terminal on the charge alternator. This operates on a similar
principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module
will also provide the alternator excitation current via this connection.
principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module
will also provide the alternator excitation current via this connection.
Package list:
1 x Generator Controller DSE501K
1 x Use Manual
2 x Key
2 x Fixed Terminals
2 x Key
2 x Fixed Terminals
Details Images
You May Like
Company Profile
Recommend Products
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier