Gen2+ Built-in IR LLL manufacturer wholesale monocular night vision scope D-M2021
A. Product description
D-M2031 and D-M3031 are most popular mil-spec and versatile monocular night vision scope on the market. They can be used handheld, head mounted or helmet mounted for hands-free, or attached to a camera or camcorder for nighttime photography and law enforcement to document. This system enables walking, driving, short-range surveillance, map reading, vehicle maintenance, and administering first aid in both moonlight and starlight. With automatic protective system controls, the monocular will shut off automatically if the illumination level surpasses 40lux for the following 10seconds. And automatic brightness adjustment system always keeps IIT brightness level constant.
B. Kit includes
1. Night Vision Monocular
2. Flip-up head mount (This part is sold seperately)
3. Protective carrying bag
4. Instruction manual
5. Lens cleaning cloth
6. Warranty card
7. Desiccant
C. Specifications
Model | D-M2021 |
IIT | Gen2+ |
Magnification | 1X |
Resolution (lp/mm) | 45-64 |
Photocathode type | S25 |
S/N (dB) | 12-21 |
Luminous sensitivity (μA/lm) | 450-600 |
MTTF (hrs) | 10,000 |
FOV (deg) | 40 |
Detection distance (m) | 220-280 |
Diopter (deg) | 5 /-5 |
Lens system | F1.2, 25.8mm |
Range of focus (m) | 0.25--∞ |
Dimensions (mm) | 140 x 77 x 56 |
Weight (g) | 373(with battery) |
Power supply (v) | 2.0-4.2V |
Battery type (v) | CR123A (1) |
Battery life (hrs) | 80(w/o IR) 40(w IR) |
Operating temperature(°C) | 60/-50 |
Relative humility | 98% |
Environmental rating | IP66 or IP67 |
D. Features
1. IP67 weatherproof
2. Low battery indication
3. Bright source protection
4. Mil-spec multi-coated optic
5. Automatic brightness control
6. Fully adjustable head mount
7. Embedded spring in battery’s cap
8. Automatic shut off when flipped up
9. No power consumption when in standby
E. Mechanical parts code and name
F. Warranty
We offer a two-year warranty from the date of purchase.
G. Precautions
1. Do not disassemble the unit.
2. It’s better to use device under +5°C to +40°C. After the unit usage in temperatures below zero, wait at least 3 hours at room temperature,to avoid condensation accumulating on the internal lens surfaces and the consequent fogging caused by extreme temperature differences.
3. Keep the device in soft carrying bag, ventilated and dry place with temperature which does not exceed +15°C. Keep away from heating device and avoid direct sunlight and high humidity which does not exceed 70%.
4. NVD should be used in nighttime and can’t be aim at strong light. If you have to test it during daytime, the front lens cap should never be removed. You can observe the target through the hole in the protection cap.
5. Use good quality lithium battery or alkaline cell, as bad quality batteries will effect the performance of the NVD and easily damage the device.
6. Try to avoid the rain and mist, and avoid dropping, shaking and collision.
7. Use clean soft cloth and dampened in alcohol,if necessary.
8. A useful tip is to remove the battery when the night vision will be not in use for over 3 days to prevent battery leakage and damaging the device.
NOTE: It is normal that the device can not be turned on when the ambient light exceeds 40 Lux. This device has protection system, which cuts off the image intensifier when ambient light level exceeds the limit of 40 Lux during a 10 seconds period.
Failture to follow the above precautions may cause the unit damage and will void the manufacturer’s warranty.