Gelgoog Price Cottonseed Neem Marula Bean Oil Making Press Sesame Seed Castor Oil Extraction Machine In India

The screw castor oil extraction machine  is mainly composed of electrical control, automatic heating, adjustment, transmission and vacuum filter oil. The oil making machine can meet food hygiene standards.

Parameters of Cannabis Oil Press Machine

The castor seed oil extraction machine adopts forced blanking device, average feeding speed, pressspeed is fast, can press more than 40 oil plants such as peanuts, soybeans, rapeseeds, sesame seeds, sunflower seeds, flaxseeds, camellia seeds, cotton seeds, pepper seeds, walnut kernel,tung seeds, castor seeds, almond etc.

After the power is decelerated, it is transmitted to the main shaft. The screw on the main shaft rotates, and the oil between the threads is continuously pushed forward. As the space between the pressing and the pressing screw is gradually reduced, the density of the oil increases, and the pressure is gradually increased.

The Difference Between Hot Press and Cold Press?

Advantage:
1.Since the seeds advance through fried, in the press process,just press it once contained the seeds of all the oil pressed out,cake residual oil rate is very low,it does not require a second press.
2.Hot pressed oil smells aroma,it had a very strong odor.
Shortcoming:
Without further processing of hot oil,This oil has a very dark color, and contain a high acid value.

Advantage:
1. Cold press oil make sure all kinds of nutrition in the materials are not been damaged,Cold press oil is also helpful for people's healthy.
2.When cooking,cold press oil will generate less cooking fumes than hot press,which can solve the troubles of some housewives.
Shortcoming:
Use cold pressed method of oil extraction, Oil yield is low, cake need for secondary press.

1. What is the material for the screw press?
Oil crops such as peanut, soybean, rapeseed,asesame, oil sunflower, flax seed, camellia seed, cottonseed, pepper seed, walnut kernel, tung seed, ramie, almond, palm, coconut shell, etc.
2.What is the reason for not producing oil or low oil yield?
The material is not wet or too dry, the oil drain is blocked by the oil slag or the squeezer is too tightly assembled.
3. What is the oil content of the slag?
Generally hot pressed slag oil content of 6-10% (according to the appropriate temperature of the pressing temperature)
4. What are the requirements for working temperature?
Cold pressing oil requires 2-3 times of pressing, oil pressing temperature (below 100 degrees Celsius), hot pressing once, oil extraction temperature (130-145 degrees Celsius)

5. What are the requirements for materials?
Oil content ≥ 8%, 5% ≤ water content ≤ 10%.