Gas liquid nitriding hardening furnace for crankshaft gears and valve parts
Pit type gas nitriding furnace is mainly used for carbon steel parts gas nitriding, mould quenching and other heat treatment . The furnace is equipped with drip device, also can be used for gas nitrocarburizing (soft nitriding) heat treatment. When doesn’t feed into ammonia gas and use drip devices, can be used as a general well type tempering furnace.
1)To obtain high surface hardness
2)To increase wear resistance and antigalling properties
3)To improve fatigue life
4)To improve corrosion resistance
5)To obtain a surface that is resistant to the softening effect of heat at temperatures up to the nitriding temperature.
Rated Power (kw) | Rated Voltage (V) | Rated Temperature (℃) | Phases | Effective Size (mm) | |
RN2-25-6 | 25 | 380 | 650 | 3 | Φ400*550 |
RN2-35-6 | 35 | 380 | 650 | 3 | Φ450*650 |
RN2-45-6 | 45 | 380 | 650 | 3 | Φ450*1000 |
RN2-60-6 | 60 | 380 | 650 | 3 | Φ650*1200 |
RN2-75-6 | 75 | 380 | 650 | 3 | Φ800*1300 |
RN2-90-6 | 90 | 380 | 650 | 3 | Φ800*1800 |
This equipment is suitable for gas nitriding treatment of various of die mould(especially suitable for H13), measuring tool, cutting tool (such as: high speed steel cutter) and so on, crankshaft, gear, cylinder liner, mechanical parts and wear-resistant parts heat treatment.
If you want a Gas liquid nitriding hardening furnace for crankshaft gears and valve parts,please contact me!
Heat treatment consultant:Vicky chan
My whatsapp/wechat/mobile:+8613318353285
Let's inquiry!