The hot dipped galvanized steel water tank is defers to the manufactured new type water tank.The manufacture and the installment of tank have no influence of the construction.There are not needed the welding apparatus, the surface is hot dipped galvanize antiseptic treatment. It's artistic durable, prevents two times pollution to water quality and it beneficial to human health. The water tank meets the construction product standardization, the seriation and the factorization request.
This product is suitable for the construction water storing, the regulating tank, heating system's inflation water tank, the condensate tank as well as the building construction, the geological prospecting, the industry, the defense project and so on temporarily store water tank.
This water tank volume has 24 kinds specifications, select for the design. The engineer also can design according to the water tank's length, width, high then factory assembles.
The inlet pipe, the outlet pipe, the overflow caliber and the position of water tank is depends on the designing. All around the water tank should have no less than 700mm channels, the bottom and the cover should no less than 600mm. When it installed, the bottom and all around between the bottom standard plate's joins must be located on the support.
(1) Support for Panels: The panels shall be supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel; Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod.
(2) Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures.
(3) Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304.
(4) Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304.
(5) Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports.The external ladders shall be galvanized mild steel or equivalent.
(6) Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage.The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank.
(7) Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter.
(8) Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of 600 x 600mm. The opening can be designs of bolt, seal-tight locking arrangement.
(9) ABS roof vent with PE insect screen.
(10) Float level indicator, optional SS304 for internal and external support structure are available on request.
(11) prop up
Common Water Tank Sizes | 1CBMs to 500 CBMs |
Water tank panel size | 1mx1m, 0.5mx0.5m, 1mx0.5m, etc. |
Water tank panel thickness | 5mm, 8mm, 10mm, 12mm, 14mm, 16mm, etc. |
(1) Strong resistance to corrosion
(2) Reasonable structure design
(3) All welded on-site combination. High strength, good sealing, prevent secondary pollution of water quality
(4) Light weight, that is one half of ordinary steel plate water tank
(5) Easy to install
(6) Clean, bright, beautiful appearance.