Cutting & Hydraulic type | Double guide pillar | |
Hydraulic motor power | 3kw,4kw | |
Hydraulic Pressure | 10-12MPa | |
Voltage | 380V /3phase/ 50 HZ (or as your requirement) | |
Cutting drive | Decelerating motor + Chain drive gear all by high-frequency | |
Control System | Panasonic /Siemens / Schneider / Delta PLC | |
Length measurement | Encoder | |
Main Frame | 300mm/350mm H-Beam or 350mm | |
Backboard Thickness | 17mm/20mm | |
Chain Size | 1inch/2inch | |
Feeding Material | Better as your drawing or from our designer | |
Feeding Thickness | 0.18mm-0.8mm | |
Effective width | Better as your drawing or from our designer | |
Productivity | 12-20/min | |
Roll Station | 12-16row (according to different design) | |
Roller Diameter | 70mm/75mm (depend on different design) | |
Roller material | 45# steel | |
Cutter material | Cr12 mould steel heat-treated hardness of HRC 60-62 degrees | |
Total Weight | 2t-12t | |
Package of machine | Waterproofing membrane, standard export packing | |
roof ridge tile roll forming machine of the Components | Manual decoiler-------------------1 set(5t) Guiding Platform------------------1 set Coil Strip Leveler------------------1 set Main Machine of Roll Forming------1 set Hydraulic Station------------------1 set Supporter Table-------------------1 set Coil Strip Leveler------------------1 set | |
Technical parameter can be changed, according to customer's need. | ||
Installation: With installation instructions, the line is connected, is very easy to operate, only need to insert the pin.
After service: Two years guarantee for machine; 24 hours technical support by email or calling;If there is any problem found of the machine, we will repair it for free within two years.
Easy to use: Our PLC is installed on the machine to reduce the space.And the PLC can be rotated to check the sheet while controlling.
1. Main roll forming machine package by Plastic film;
2. Tighten to container with steel wire rope and welded machine with container by angel iron;
3. PLC control system and motor pump are packed in box with water proof paper coverage;
4. We have a professional loading technician to ensure that the goods are loaded into the container without any damage.
Q:How is this machine's service life?
A:In the normal maintenance, the service life at least 8 years.
Q:Can you be responsible for transport?
A:Yes, please tell me the destination port or address. We have rich experience in transport.
Q:can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Q:Can you supply the raw materials?
A:Yes, we can supply the galvanized steel coil, galvalume steel coil, color steel coil, and aluminum coil.
Q:Why are you choose our company's products?
A:Because our products cost-effective, not only high quality and affordable.
Q:Where is the quality of our product?
A:First of all, we are experienced and good reputation in China construction business for many years;
Second, the middle and high level customers are our target market, we believe that the high quality products can win a broder market.
Third, the main components of well-known foreign brands, old brand components. Keep clear with the parts supplier and direct business contacts for more than 10 years.
Q:Does one machine can only produce one style panel profile?
A:Not exactly. For wider and double layer making machine. It can produce more than 3 kinds of panels.
Q:What can you do if the machine broken?
A: The warranty period of our machine is 14 months, if the damaged parts can not be repaired, we can send new parts to replace the damaged parts for free, but you need to pay the courier fee yourself. If after the warranty period, we can resolve the issue through negotiation, we provide technical support for the entire life cycle of the device.
Q:You are trade company or factory?
A:We are factory with professional production team and service consciousness just for exporting various types of cold roll forming machines.
Q:How long the machine could be made?
A: Generally speaking, the machine can be completed within 20~45 working days. But if you need machines urgently, we can do our best to save you time.
