Galvanized Steel Metal Fixing Self Adhesive Insulation Pin stick up rock wool

Self-adhesive hangers are designed to fix efficiently insulation on smooth surfaces such as air ducts, attenuators, chambers and enclosures. It consists of a pin, firmly mounted on a high quality self-adhesive base.
After the self-adhesive hangers are installed, the insulation is impaled over the spindle & secured with a self-locking washer. 

Insulation Hanger, Insulation Pins is a insulation hanger, it is fabricated by a 2" X 2" metal base with a tape on the back riveted with a pin, we also call it as self-adhesive pin or peel&press pin, it works with a self locking washer to fasten the insulation, different from the perforated base pins, they are used for sticking onto new or clean sheet metal of insulation construction.

1. Environmentally-friendly
2. Light, dust free, fire retardant and easy to install
3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding
4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning
5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning
Self locking washers is available with the pins .

WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly

APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place

Insulation fixing pinsSelf adhesive insulation pinsInsulation hangersInsulation anchors
Lacing anchorLacing ring
Cup head weld pinsPerforated base pinsQuilting pins&Duct liner pinsCD weld pins
Self locking washers & dome caps
Insulation Impaling Clips
drive pins

The package of the insulation pins could be paper cartons and wood cartons.

1. insulation pin length less than 65mm, 1000pcs per carton, 64 cartons per pallets.
2. insulation pins length 70mm-120mm, 500pcs per cartons,64 cartons per pallets.
3. insulation pins length 125mm-250mm, 250 pcs per cartons, 64 cartons per pallets.
4. as your requirement

One-to-one order service
Door to door logistics service
Cartographic confirmation service
Processing customization service
Packaging design service
Document making service
Inspection and inspection service

micrometers

vernier caliper

thread plug

thread ring gauge

exterior inspection:surface finish judgement

size inspection:within common difference

thread inspection:mainlander the precision of the thread,inspected by Go/No gogage

salt-fog test machine

rally machine

hardness machine

spectrum analyzer

toolmaker microscope

altimeter

projector

stud welder

decay preservation inspection:mainly under the test of salt-fog experiments to inspect the surface finish and the reservation from decay

intensity inspection

material inspection

thread inspection

hardness inspection

welding inspection

1. Sample;DHL/EMS/UPS/TNT/EXPRESS

2. Large Order:we recommand you by SEA ,or by AIR if in an emergency.

3. More insulation pin products, please click here