Galvanized Steel Corner Bead Roll Forming Machine
angle bar roll forming machine,l type forming machine,good price angle steel forming machine
1.The picture machine:
Angle Steel Roll Forming machine
2.Product information
Technical parameters: | |||||||
1 | Name of commodity & specification | C channel machine | |||||
2 | Main motor power | 5.5kw, 3 phase | |||||
3 | Hydraulic motor power | 3kw | |||||
4 | Hydraulic Pressure | 10-12MPa | |||||
5 | Voltage | 380V /3phase/ 50 HZ (or as your requirement) | |||||
6 | Control System | PLC Delta Inverter | |||||
7 | Main Frame | 300mm H-Beam or 350mm | |||||
8 | Backboard Thickness | 14mm | |||||
9 | Chain Size | 20mm | |||||
10 | Feeding Material | color steel coils | |||||
11 | Feeding Thickness | 0.25-0.4mm | |||||
12 | Feeding Width | 100mm,depend on different design | |||||
13 | Effective width | 60*28mm | |||||
14 | Productivity | 0-40m/min | |||||
15 | Roll Station | 8 roll steps(according to different design) | |||||
16 | Roller Diameter | 40mm(depend on different design) | |||||
17 | Roller material | 45# steel | |||||
18 | Cutter material | Cr12 , quenched | |||||
19 | Cr-Plating Size | 0.05mm | |||||
20 | Overall Size | 4500×0.60×1100mm | |||||
21 | Total Weight | 4.0T | |||||
22 | Components | Manual Uncoiler-------------------1 set | |||||
Guiding Platform------------------1 set | |||||||
Coil Strip Leveler------------------1 set | |||||||
Main Machine of Roll Forming------1 set | |||||||
Electric-Motor---------------------1 set | |||||||
Cutting Device--------------------1 set | |||||||
Hydraulic Station------------------1 set | |||||||
PLC Control-----------------------1 set | |||||||
Supporter Table-------------------1 set | |||||||
23 | Workflow | Manual decoiling----feeding and guiding----roll forming----cut to length----run out table | |||||
24 | Package | nude in the container | |||||
25 | Minimum order quantity | 1 set | |||||
26 | Payment terms | T/T(30% T/T pay in advance, the remaining 70% pay before ship) | |||||
27 | Delivery time | 30 working days later after receiving the deposit | |||||
All technical parameters can be changed, according to user's need. |
3.The production process
Decoiler→Flating→Feeding →Forming→Cut to length→Colletion
(finish goods)
roof tile making machine,roll forming mchine roof making machine,roof sheet making machine
4.Production Flow
5.Production Machinery
We provide the technical support for whole life.
Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.
When need the technician to go abroad, we will arrange the technician.
But the buyer should take all the cost, including Visa, Roundtrip ticket,
suitable accommodation and pay the service fee to the technician with $150/days
payment:
T/T( 30% by T/T in advance, the rest 70% to be payed by T/T after you inspect the machine in seller's factory before delivery )
Our company has been built over 15 years,it is located in north of China,near from Tianjin port,we have strong selling team and exquisite technology