GVS T-series Camera Interface Module(T-C)
Brief Introduction
This product is camera interface module ,which can be configured as independent outdoor station mode or outdoor station extended camera mode.
Interface Instruction
BUS1:Bus Interface ;
RC:Impedace Matching ,NC:Non-impedance Matching ;
Band switch turns to RC→Impedance Matching ;
Band switch turns to NC →Non-impedance Matching .
DA,DB,GND:RS 485 interface (reserved);
CVBS3,GND:Camera 3 signal pin(reserved);
CVBS2,GND:Camera 2 signal pin(reserved);
CVBS1,GND:Camera 1 signal pin.
Installation Steps
Dimension(L/W/D):55 x 55 x 24 mm |
Step 1:Drill holes into the wall according to the two location holes on the module |
Step 2:Align the two location holes of the module with the holes drilled in step 1 |
Step 3:Tighted the screws and fix the module on the wall |
Products pictures
Related products :
Two -Wire Door Phone System
The T-Series 2-wire analog video door phone solution is a stabel &economic system which supports both audio/video intercom,access control,CCTV surveil lance and all other intercom functions,capacity of the system is excellent with:
• Up to 128 indoor monitors
• Up to 3 outdoor stations
• Up to 160 meters from door station to the last monitor.
Company profile
GVS Since 1999
Established in 1999,GVS GROUP has beed devoting itself into R&D of KNX building control system as well as video door phone solution.With its highlingted capability in display (CRT/TFT) development and manufacture,the group has long been in the first rankings of suppliers for both KNX building control system as well as IP/2-Wire Video Door Phone system.As the FIRST native BOARD MEMBER of KNX CHINA and first -ranking VDP supplier ,GVS GROUP will continuously contribute to both industries in coming decades.
Company History
In 1990: GVS was establish
In 2008: GVS become the first Chinese KNX menber in China.
In 2011:GVS KNX Training Center established with the KNX training course held(Over 400 KNX Partners)
In 2013:In 2015 GVS become the first native board member of KNX China.
In 2015:Initiator&Chairman of the drafting team for IEE1888.4 Green Smart Home &Building Control Network Prortocol Standard.
In 2017 :GVS officially enter the New OTC Market and become a listed company.
In 2018:GVS become the first native rotating chairman of KNX CHINA.
1. Lead time: Sample within 3 days , bulk order within 3 weeks after deposit
2. Shipping: FOB GZ/SZ
3. Packaging: Plastic Tray+Anti-Static Foam+Paper Card+Vacuum Bag+Carton (Optional)
FAQ
Q1:Can I have a sample order?
yes,we are willing to offer trial sample order to you for quality test.
Q2:What is the delivery time ?
1.sample order aboout 1~3 working days.
2.General order about 15~25 working days .
3.Bull order about 25~45 working days .
Q3:When will shipping the order ?
We will shipping them whthin 1~2days after paymet .
Q4:What is your payment method ?
We accept payment of T/T westerm union and L/C paypal.
Q5:How long is your warranty ?
We provide 2 years warranty after the shippingdate.
Q6:Where is your factory ?
Our company and factory are in Gungzhou.China.
welcome to visit our factory.