GVS T-series Camera Interface Module(T-C)
Brief Introduction
This product is camera interface module ,which can be configured as independent outdoor station mode or outdoor station extended camera mode.
Interface Instruction
BUS1:Bus Interface ;
RC:Impedace Matching ,NC:Non-impedance Matching ;
Band switch turns to RC→Impedance Matching ;
Band switch turns to NC →Non-impedance Matching .
DA,DB,GND:RS 485 interface (reserved);
CVBS3,GND:Camera 3 signal pin(reserved);
CVBS2,GND:Camera 2 signal pin(reserved);
CVBS1,GND:Camera 1 signal pin.
Installation Steps
Dimension(L/W/D):55 x 55 x 24 mm |
Step 1:Drill holes into the wall according to the two location holes on the module |
Step 2:Align the two location holes of the module with the holes drilled in step 1 |
Step 3:Tighted the screws and fix the module on the wall |
Products pictures
Related products :
Two -Wire Door Phone System
The T-Series 2-wire analog video door phone solution is a stabel &economic system which supports both audio/video intercom,access control,CCTV surveil lance and all other intercom functions,capacity of the system is excellent with:
• Up to 128 indoor monitors
• Up to 3 outdoor stations
• Up to 160 meters from door station to the last monitor.
Company profile
GVS Since 1999
Established in 1999,GVS GROUP has beed devoting itself into R&D of KNX building control system as well as video door phone solution.With its highlingted capability in display (CRT/TFT) development and manufacture,the group has long been in the first rankings of suppliers for both KNX building control system as well as IP/2-Wire Video Door Phone system.As the FIRST native BOARD MEMBER of KNX CHINA and first -ranking VDP supplier ,GVS GROUP will continuously contribute to both industries in coming decades.
Company History
In 1990
GVS was establish
In 2008
GVS become the first Chinese KNX menber in China.
In 2011
GVS KNX Training Center established with the KNX training course held(Over 400 KNX Partners)
In 2013
In 2015 GVS become the first native board member of KNX China.
In 2015
Initiator&Chairman of the drafting team for IEE1888.4 Green Smart Home &Building Control Network Prortocol Standard.
In 2017
GVS officially enter the New OTC Market and become a listed company.
In 2018
GVS become the first native rotating chairman of KNX CHINA.
1. Lead time: Sample within 3 days , bulk order within 3 weeks after deposit
2. Shipping: FOB GZ/SZ
3. Packaging: Plastic Tray+Anti-Static Foam+Paper Card+Vacuum Bag+Carton (Optional)
FAQ
Q1:Can I have a sample order?
yes,we are willing to offer trial sample order to you for quality test.
Q2:What is the delivery time ?
1.sample order aboout 1~3 working days.
2.General order about 15~25 working days .
3.Bull order about 25~45 working days .
Q3:When will shipping the order ?
We will shipping them whthin 1~2days after paymet .
Q4:What is your payment method ?
We accept payment of T/T westerm union and L/C paypal.
Q5:How long is your warranty ?
We provide 2 years warranty after the shippingdate.
Q6:Where is your factory ?
Our company and factory are in Gungzhou.China.
welcome to visit our factory.
contact us