portable high pressure air compressor
I.Technical Parameters of high pressure air compressor
Model | Working pressure (Bar) | Displacement (L/min) | Drive (V) | Power of motor (kW) | Noise (dB(A)) | Weight (kg) | Dimension (cm) |
GSW200A | 300 | 200 | 380 | 4.45 | < 75 | 150 | 100×56×63 |
GSW200B | 300 | 200 | 220 | 4.45 | < 75 | 150 | 100×56×62 |
GSW200C | 300 | 200 | Honda engine | 4.45 | < 75 | 150 | 100×56×62 |
Compressor | Model | GSW200 |
| Compressor shape | W three stage air-cooled portable type |
| Compression medium | Air |
| Air displacement (m³/min) | 0.2 |
| Working pressure (Bar) | 300 |
| Compression stage | 3 stage |
| Rated speed (r/min) | 1300 |
| Noise (dB) | <79 |
| Lubrication system | splash |
| Transmission model | V-belt drive |
| Cooling model | Air cooling |
Electric motor | Power (kW) | 4 |
| Rated voltage (V) | 220V/380V/Gasoline |
| Frequency (HZ) | 50 |
Dimension (cm) | 100*56*64 | |
Weight (kg) | 160 | |
Note: High hose interface caliber | G5/8 |
II.Production Description:
Stress testing special GSW200 piston type air compressor
GSW200 air tightness test for high pressure air compressor working principle is the natural state of air pass level 4 level compression, compression as 30 Mpa pressure per square centimetre, (1 million Mpa) = 10 kilograms kg force, in compression at the same time, the product filter system will be filter and eliminate moisture and impurities in the air, and to provide the air pure, safe, reached the standard of human breath of life. GSW200 type air tightness detection with high pressure air compressor is mainly used for gas cylinders, cylinders, valves, piping, pressure gauges, high pressure boiler and pressure vessel pressure vessel or air tightness test, air tightness test, pressure test, strength test, air tightness check, etc. Particularly suited to the bureau of quality and technical supervision and inspection of boiler, special equipment inspection institute, aerospace, missile launch as well as to the air quality requirements higher scientific research units and using the chemical engineering department.
VI.After-sales service
The warranty and after-sales service terms:
1.Our company is responsible for the maintenance for one year since the date of delivery.
2.Our service engineer will be responsible for the installation and debugging of the machine if necessary, the salary and general expenses is with borne by the buyer.
3.Long-term responsible for providing spare parts.
4.Equipped with complete equipment and spare parts in Chinese, to provide customs the fastest speed.
Warranty regulations
Our company guarantees products have no material and manufacturing defects in delivery and use 12 months.