Industrial spray dryer
High Speed Rotary Spray Dryer Series of spray dryer is gas-liquid cocurrent flow drying equipment, using high-speed centrifugal atomizer,the liquid will be atomized into fine droplets, then mix with the hot air from the distributor in the dryer, heat and mass transfer exchanges rapidly during the mixing process.In a very short period of time the liquid become dry powdered products.Production control and product quality control is convenient and reliable. It is widely used in the drying production of different types of liquids materials.
Description :
After fresh air is filtered and heated,it enters into the air distributor which on the top of the drier.The hot air in spiral form equably enters into the drying room.When liquid raw material are passed through the high-speed centrifugal sprayer on the top of the tower,it will be rotated and sprayed into the extreme slim mist liquid beads.Raw material can be dried to the final products instantly while it contact with the heatedair.Finished products are discharged continuously from bottom of the drying tower and cyclones segregator.Wasted air is discharged from blower.
Technical parameters:
Model | Size |
Tower body |
Centrifugal spray atomizer |
Materail | Heating source |
GRT-SP-5 |
1600×1100×1750mm |
Φ1000mm |
Φ50 mm |
Electric Steam Gas Coal |
|
GRT-SP-25 |
4000×2700×4500mm |
Φ1750mm |
Φ80 mm |
||
GRT-SP-50 | 4500×2800×5500mm |
Φ2300mm |
Φ120mm |
||
GRT-SP-100 | 5200×3500×6700mm | Φ2700mm |
Φ150mm |
||
GRT-SP-200 | 7500×6000×8000 | Φ3200mm |
Φ150mm |
||
GRT-SP-1000 |
Packaging & Shipping