GPS Antenna GS-500
1. Using multi feed point design to ensure the superposition of phase center and geometrical center which could minimize the influence of measurement error to lowest range.
2. Antenna unit gain is high, the direction of the beam width, to ensure that the low elevation signal to accept the effect, in some block more serious occasions can still receive satellite.
3. With anti-multipath choke plate, effectively reduce the impact of multi-ath on the measurement accuracy.
4. With waterproof, anti-UV cover, for the antenna to provide long-erm work in the field to provide protection.
Antenna Specification | Frequency Range: GPS L1/L2, GLONASS L1/L2, Beidou B1/B2/B3 | ||
Impedance: 50 Ohm | |||
Polarization: RHCP | |||
Axial Ratio: ≤ 3 dB | |||
Azimuth Coverage: 360° | |||
Output VSWR: ≤ 2.0 | |||
Gain at Zenith: ≥ 5.5 dBi | |||
Phase Center Error: ± 2 mm | |||
LNA Specification | LNA Gain: 40±2 dB | ||
Noise Figure: ≤ 2.0 dB | |||
Output VSWR: ≤ 2.0 | |||
Ripple: ± 2dB | |||
Drain Voltage: 3.3--12 VDC | |||
Current Consumption: ≤ 45 mA | |||
Group Delay: ≤ 5 ns | |||
Mechanical Specification | Dimension: φ152 x 62.2 mm | ||
Connector: TNC Female | |||
Environmental Specification | Operating Temperature: -40°C to +85°C | ||
Storage Temperature: -55°C to +85°C | |||
Humidity: 95% Non-Condensing |