GD-150J CNC cutting tool grinding machine/diamond cutter grinding machine
Machine features:
1. Machine structure: Machine bed (base) using high-quality integrated castings, the main components weighing 1.6 tons, to meet the requirements of any super-hard material grinding.
2. Machine spindle: grinding head with high-precision frequency control spindle, power: 3. O kilowatts, the maximum speed of up to 4000 r / min, using circulating water cooling, grinding head spindle rotation accuracy: 0.002 mm Jump 0.003 mm.
3. Manual feed mechanism: The machine adopts "rapid feed" and "precise feed", which are used for rapid feed / retract (0.5 mm / rev) and work feed (3 mm / rev) Not only improves the production efficiency but also ensures the feed precision.
4. Grinding head swing: the electrical components controlled by the intelligent smooth and no reverse vibration, swing amplitude of 0 to 30 mm between the free to adjust, so that uniform consumption of grinding wheel, timely self-sharpening, to ensure the grinding accuracy and roughness.
5. On-line CCD measurement: using optical microscopes, CCD cameras and industrial monitors consisting of the knife and measuring system, so that the machine can accurately detect from the R0.05 ~ R20 the various tip arc, but also accurate measurement Cutting knife width and the angle of the tip.
Technology breakthrough
1. Dual-position design: the machine's two stations, can easily operate and observe. Positive station (axial grinding wheel) to avoid splashing water; side to facilitate the cutting knife and knife and other special tools, grinding.
2. Vertical axis optimization: the micro-adjustment of the vertical axis into the work table in the fixture, greatly enhanced the stability and rigidity of the equipment.
Specifications:
Grinding wheel diameter | 150 mm |
Grinding wheel installation aperture | 40 mm |
Grinding shaft power | 3 kw |
Speed adjustable range | 500 - 4,000 r / min |
Isolation of the cooling water tank volume | 70L |
The optical microscope magnification | 0.7 - 4.5 times |
Voltage | 380 volts / three-phase / 50Hz |
Mains power | 12kw |
Dimension | 1890 * 1650 * 1980 mm |
Total weight | 2400kg |