GCMS8900-1 Gas Chromatography / Mass Spectrometer

 GCMS8900 Gas Chromatography / Mass Spectrometer

Introduction:

The GCMS8900 Gas Chromatograph/Mass Spectrometer is a powerful new mass spectrometer developed by gas chromatography and mass spectrometry experts with 22 years of experience in this field. Innovative gas chromatography/mass spectrometry supports a large number of spectra, each gas chromatographic peak scan speed is up to (20,000 amu/sec), the mass range is very wide (1-1,200 u), and the instrument detection limit is as low as (OFN less than 10 fg ), the sensitivity is extremely high.

Features:

1. The high-performance ion source can extend the life and operation of the dual filament to improve the performance of the GC/MS. The high-performance ion source is protected by an electronic lens.

2. The innovative optimization program in the MS software can increase the sensitivity of the system, so the system can achieve a lower detection range when analyzing trace-level compounds.

3. The high-capacity vacuum system provides a stable high vacuum area, allowing analysis of a large number of environmental samples. The analytical power of this standard vacuum system is 240L/S and 300L/S (optional)

4. The powerful harmonic process enhances the sensitivity, stability and repeatability of the MS results, while custom manual tuning allows for changes to the setpoints to achieve a higher level of sensitivity in a particular analysis.

5. Optimized full scan and optional ion mode support simultaneous injection of multiple samples.

6, ultra-fast scanning speed (20,000 amu / s), supported by advanced firmware protocol, improve analytical performance, ensure fast analysis of narrow-aperture capillary columns

7. The powerful ion filtering function of the four-stage filter can effectively remove non-target ions, thus ensuring a more stable and higher level of signal.

8. The deflection electrode eliminates neutral particles that reach the detection system, which allows you to improve the sensitivity of the MSD and increase the S/N ratio.

9. Applicable quality range from 1 to 1200u, which allows it to analyze a large number of compounds.

10. The column can be easily replaced with special tools, and the distance from the end of the column to the MS source box can be easily measured using special tools.

11. Chemical ionization and direct injection probes (DIP) are available for certain models.

12, the new creative MS hardware and software design system is easy to operate, and allows the operator to spend less time on sample injection to get results.

13. Clarity software makes it easy for operators to control GC/MS and LC/MS, while the software supports the NIST mass spectrometer to automatically identify and name compounds.

Technical parameter:

Ion source: EI (CI optional)

Quality range: 1-1200u

Sensitivity (EI): Signal-to-noise ratio is greater than 1500:1 (1UL when OFN or SIM is 1pg/uL)

Resolution: 0.7amu

Electronic energy: 0 to 240ev adjustable

Instrument Detection Limit (IDL): <10fg (8 sequences are not separable injections, 100fg OFN.m/z 272)

Radiant energy: up to 500uA

Power supply: 220V±10%, 50/60Hz

Scan rate: up to 20,000 amu./s

Power supply: up to 900W

Quality stability: ±0.1amu/48h

Weight: 48kg

Ion source temperature: up to 350 ° C

Size: 35x65x50cm

Transmission line temperature: up to 400 ° C

Data transfer: LAN

Scan mode: full scan, selective ion scan, alternate scan

Applicable gas phase model: GC8900 gas chromatograph

Turbo pump: 240L/sec (300L/sec as optional)

Company Information

Dear customer : We,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history. Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing,bioscience,medical apparatus and instruments,internet technology and some frontier science. Through a long-time development,we own a national resources system of various professional talents,abundant supply for various components & parts and special materials, full producing &processing equipments,strong Technological standardization and a complete quality assurance system. If you need OEM or ODM in manufacturing ,scientific research,market development and or you want to build your own brand in your country,it’s our honor to cooperate with you.In this way,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba. We firmly believe that science and technology is no boundaries. Our mission is to make every effort to contribute to all humanity.   Your earlier friendly enquire from us would be highly appreciated.Thanks in advance!