Model# | DW-GC1120 | |
Sample Introduction System | sample injector and evaporation chamber | |
Column Oven | Temperature range | Ambient temperature +7℃ ~ 400℃ (in 1℃ increment) |
Temperature accuracy | ± 0.02℃ | |
Cooling time | 400℃ to 50℃ in 8-10 min at 25℃ ambient | |
Programmed temperature setting | 0.1℃~40℃/min (in 1℃ increment) | |
Program ramps | 7 ramps in total (10 ramps available with control workstation) | |
Size (L*W*H) | 284*280*241mm(inside)/340*345*281mm(outside) | |
Flame Ionization Detector (FID) | Detection limit | ≤3×10-12g/s (C16) |
Best test result | ≤3×10-12g/s (C16) | |
Drift | ≤6×10-13A/30min | |
Noise | ≤5×10-14A | |
Linearity range | ≥106 | |
Thermal Conductivity Detector (TCD) | Sensitivity | ≥5000mV, mL/mg (C16) |
Baseline noise | ≤20µV | |
Drift | ≤60µV/h | |
Linearity range | ≥104 | |
Flame Photometric Detector (FPD) | Detection limit | ≤8×10-13g/s(P) ; ≤8×10-11g/s(S) |
Drift | ≤2×10-11A/30min | |
Baseline noise | ≤5×10-12A | |
Nitrogen-Phosphorus Detector (NPD) | Detection limit | ≤5×10-12g/s(N) (Azobenzene) ≤5×10-13g/s(P) (Malathion) |