Standard:: ASTM, DIN, GB, JIS, ASTM A106-2006, ASTM A53-2007, ASTM A179-1990, ANSI A213M-2001, DIN 1629/3, DIN 2391, DIN 17175, DIN EN 10305, GB/T 8163-1999, GB/T 8162-1999, GB/T 3639-2000, GB/T8162, Gb/t8163, GB/T3639, JIS G3445-2006

Grade:: 10#, 20#, 45#, 16mn, A213, 35CRMO4, 30CrMo, Q235, Q345, Q195, ST37, ST52, ST45, ST35, ST37.4, 10#-45#, 16mn, A53-A369, Cr-Mo alloy, Q195-Q345, ST35-ST52

Surface Treatment:: Polishing, Galvanized

Technique:: Cold Rolled

Certification:: ISO9001:2008

Secondary Or Not:: Non-secondary

color of steel pipes:: slivery

tolerance of steel pipes:: +/-0.03mm

shape of steel pipes:: round

technology of steel pipes:: cold drawn & cold rolled

Material of steel pipes:: GB 40Cr

Surface of steel pipes:: polishing, galvanized

Yield Strength of steel pipes:: ≥ 785 (MPa)

Tensile Strength of steel pipes:: ≥ 980 (MPa)

Length of steel pipes:: customers' request

Supply Ability

Supply Ability:: 800 Ton/Tons per Month

Packaging & Delivery

steel pipe steel pipes steel pipe steel pipes steel pipes steel pipe steel pipes steel pipe steel pipes steel pipe steel pipe steel pipes steel pipe steel pipes

GB 40Cr

Chemical Composition(%)									Mechanical Property
C	Si	Mn	S	P	Cr	Ni	Cu	Mo	Yield Strength	Tensile Strength
									( σs )	( σb )
0.37~0.44	0.17~0.37	0.50~0.80	≤0.035	≤0.035	0.80~1.10	≤0.30	≤0.030	/	≥ 785 (MPa)	≥ 980
										(MPa)
End Shape	Beveled end, plain end, vanished, or adding plastic caps to protect the two ends as per customer's requirements
Surface	Oiled, Galvanized, Phosphate etc
Treatment
Technique	Cold drawn
Application	1. Automotive and mechanical pipes
	2. Petroleum cracking pipes
	3. High Pressure Boiler Pipe
	4. Low and middle pressure fluid transportation pipeline
	5. Chemical fertilizer equipment pipes
	6. Heat exchanger pipes
Delivery	1. BK (+C)	No heat treatment after last cold forming process.
Conditions	2. BKW (+LC)	After last heat treatment there is a light finishing pass (cold drawing)
	3. BKS (+SR)	After the final cold forming process the tubes are stress relieve annealed.
	4. GBK (+A)	After the final cold forming process the tubes are annealed in a controlled atmosphere.
	5. NBK (+N)	After the final cold forming process the tubes are annealed above the upper transformation point in acontrolled atmosphere.
Package	1. Bundle Packing.
	2. Plain end or vanished as per customer's request.
	3. Wrapped in waterproof paper.
	4. Sackcloth with several steel strips.
	5. Pack in heavy tri-wall boxes.

steel pipe steel pipes steel pipe steel pipes steel pipes steel pipe steel pipes steel pipe steel pipes steel pipe steel pipe steel pipes steel pipe steel pipes

1
	Are you a trading company or manufacturer?

	Yes,Changzhou Drake International Trade Co.,Ltd. Was established in 2014, It is an enterprise incorporating industry.
	And we have our own factory - Changzhou Chengqi Steel Tube Factory.
	http://chengqisteelpipe.en.alibaba.com/

2
	How can I get the price?
	We usually quote within 24 hours after we get your inquiry by telling us the material, out diameter,
	wall thickness length, quantity and application of the steel pipe which you need. If you are very
	urgent to get the price, please inform us in email so that we will regard your inquiry priority.

3
	How can I get a sample to check your quality?
	After price confirmation, you can require for samples to check our quality.
	we will provide you the sample for free, however we could only make sure the same material, the
	dimension will be much similar as your request but not same. And customer should afford the
	charge of shipment.

4
	How long can I expect to get the sample?
	The samples will be sent to you via express and arrive in 3-5 days.
	You can use your own consignee account or prepay us if you do not have an account.

5
	What about the lead time for mass production?
	Honestly, it depends on the order quantity and the season you place the order.

6
	What is the Small Qty Process Charge.
	It is the payment for customer whose order qty is less then Min Order Qty. Because small qty of
	products should be processed same in the production flow as big qty and the average cost would
	get much higher than big ones. So there is a small Qty Process Charge to ensure the profit of our
	factory and usually the amount of it is about $250.00

7
	Could the pipe be customized for us?
	Yes. We are the professional manufacturer which has rich experience in Precision Seamless Steel
	Pipe manufacturing.

	We could print the logo and label under your requirements if you need OEM products. Beside this,
	we still do some refined processes like CNC cutting, chamfering, galvanization and tapping, if you
	have detailed spec or drawing.Our production lead time is within 30-45 days.

8
	What is your terms of delivery?
	We accept EXW, FOB, CIF, DDU etc. You can choose the one which is the most convenient or cost
	effective for you.

9
	Shipping
	European Countries: 22-28 days,
	The United States: East --13-16 days, West--21-28 days
	Brazil: 30-40 days
	Russia: 36 days
	Japan: 3 days
	Please advise your port in you inquiry for quoting, will quote for you specifically

steel pipe steel pipes steel pipe steel pipes steel pipes steel pipe steel pipes steel pipe steel pipes steel pipe steel pipe steel pipes steel pipe steel pipes

sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets sockets

No desirable products?

Sourcing assistant>

How to start your business

Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier

Send Enquiry

To: Peter Shen

Meo Machinery Co.LTD

Enquire

Related Categories

OtherSteelProducts StainlessSteel SteelRebars SteelStrips SteelWire Tinplate