Welcome to TradeChina
Fushun Inconel Alloy 600 Nickel Based Superalloy Wire
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Information
Description
Inconel 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.
This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
Applications
Some typical applications are: Barge and tank truck liners; Carburizing atmospheres; Ethylene dichloride crackers; Furnace trays, mufflers, hangers; Gasoline stabilizer production; MgCl2 evaporates; Phenol condensers; Soap manufacture; Titanium dioxide; Vegetable and fatty acid vessels
Standard
Rod, Bar, Wire and Forging Stock: ASTM B 166; ASME SB 166; ASTM B 564; ASME SB 564; AMS 5665; AMS 5687; BS 3075NA14; and 3076NA14; DIN 17752; DIN 17753; and DIN 17754; ISO 9723, 9724, and 9725, MIL-DTL-23229, QQ-W-390.
Plate, Sheet and Strip: ASTM B 168; ASME SB 168; ASTM B 906; ASME SB 906, ASME Code Cases 1827 and N-253, AMS 5540, BS 3072NA14 and 3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.
Pipe and Tube: ASTM B 167; ASME SB 167, ASTM B 163; ASME SB 163, ASTM B 516; ASME SB 516, ASTM B 517; ASME SB 517, ASTM B 751; ASME SB 751, ASTM B 775; ASME SB 775, ASTM B 829; ASME SB 829, ASME Code Cases 1827, N-20, N-253, and N-576, SAE/AMS 5580, DIN 17751, ISO 6207, MIL-DTL-23227
Other: ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR NC15Fe
Inconel 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.
This alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
Applications
Some typical applications are: Barge and tank truck liners; Carburizing atmospheres; Ethylene dichloride crackers; Furnace trays, mufflers, hangers; Gasoline stabilizer production; MgCl2 evaporates; Phenol condensers; Soap manufacture; Titanium dioxide; Vegetable and fatty acid vessels
Standard
Rod, Bar, Wire and Forging Stock: ASTM B 166; ASME SB 166; ASTM B 564; ASME SB 564; AMS 5665; AMS 5687; BS 3075NA14; and 3076NA14; DIN 17752; DIN 17753; and DIN 17754; ISO 9723, 9724, and 9725, MIL-DTL-23229, QQ-W-390.
Plate, Sheet and Strip: ASTM B 168; ASME SB 168; ASTM B 906; ASME SB 906, ASME Code Cases 1827 and N-253, AMS 5540, BS 3072NA14 and 3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.
Pipe and Tube: ASTM B 167; ASME SB 167, ASTM B 163; ASME SB 163, ASTM B 516; ASME SB 516, ASTM B 517; ASME SB 517, ASTM B 751; ASME SB 751, ASTM B 775; ASME SB 775, ASTM B 829; ASME SB 829, ASME Code Cases 1827, N-20, N-253, and N-576, SAE/AMS 5580, DIN 17751, ISO 6207, MIL-DTL-23227
Other: ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR NC15Fe
Grade | Ni | Cr | Fe | Mn | Cu | Si | C | S | S |
600 | ≥72.0 | 14.0–17.0 | 6.0–10.0 | ≤1.0 | ≤0.5 | ≤0.5 | ≤0.15 | ≤0.015 | ≤0.015 |
Form and Condition | Tensile Strength | 0.2% Yield Strength | % Elongation in 2" | % Reduction of Area | Rockwell Hardness | ||||
Rod and Bar Cold-drawn Annealed As-drawn Hot rolled Annealed As-rolled Hot-finished Strip Annealed | 80-100 105-150 80-100 85-120 80-120 80-100 | 552-689 724-1034 552-689 586-827 586-827 552-689 | 25-50 80-125 30-50 35-90 35-90 30-45 | 172-345 552-862 207-345 241-621 241-621 207-310 | 55-35 30-10 55-35 50-30 50-30 55-35 | 70-60 60-30 70-60 65-50 65-50 ---- | 65-85B 90B-30C 65-85B 75-95B 75-95B 84B max. | ||
Annealed | 800 – 1000 | 116 – 145 | – | – | |||||
No 1 Temper | 1000 – 1200 | 145 – 175 | – | – | |||||
Spring Temper | 1250 – 1500 | 180 – 225 | – | – | |||||
No 1 Temper + Annealed + Aged | 1250 – 1450 | 181 – 210 | -200 to +550 | -330 to +1020 | |||||
No 1 Temper + Aged | 1520 – 1720 | 220 – 250 | Contact Alloy Wire Technical Dept | ||||||
Spring Temper + Annealed + Aged | 1250 – 1450 | 181 – 210 | -200 to +550 | -330 to +1020 | |||||
Spring Temper + Aged | 1700 – 1950 | 247 – 283 | Contact Alloy Wire Technical Dept | ||||||
Corrosion Resistance
The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions. This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds
Heat Treatment
Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Hot Working/Forging
The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions. This alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds
Heat Treatment
Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Hot Working/Forging
Low sulfur reducing furnace atmospheres should be used in forging. Major hot working should be done between 2300/1850°F, while light working may be continued as low as 1600°F. No hot working should be attempted between 1600/1200°F due to lower ductility in that range.
Machinability
Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp. Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.) Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.
Cold Working
For higher properties, alloy 600 can be cold worked below 1200°F (649°C).
Welding
Alloy 600 can be joined by the usual welding , brazing, and soldering process.
Machinability
Alloy 600 is machinable in both the hot worked and annealed conditions. Because considerable heat is generated in machining this alloy, high-speed steel, cast nonferrous or cemented carbide tools should be used. The tools should be kept sharp. Lathe turning speeds with high-speed and nonferrous tools are 35/45 sfm (0.18/0.23 m/s); speeds with cemented carbide tools are 100/175 sfm (0.51/0.89 m/s). (This data should be used as a guide for initial machine setup only. The figures used are averages. On certain work, the nature of the part may require adjustment of speeds and feeds.) Sulfur-based oil should be used as a lubricant, but should be completely removed before the machined part is exposed to elevated temperatures, as in welding.
Cold Working
For higher properties, alloy 600 can be cold worked below 1200°F (649°C).
Welding
Alloy 600 can be joined by the usual welding , brazing, and soldering process.
Produce Process
Factory Information
Recommend Products
FAQ
1, What is your time of making a sample?
Usually we will take 1~3 days to make the sample
2, What is your MOQ?
1-3 tons accordingto different size for stocks.
3,What is your delivery time?
For stocks, we can send the goods to loading port within 7 days after receiving your deposit For production period, it usually needs about 15days- 30 days after receiving the deposit
4, What is your shipping port?
Tian jin port, Qingdao port, Shanghai Port
5, What is your Main exporting countries?
European, Middle east, South America, Southeast Asia market are our main market
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier