ITEM | UNIT | SPEC | ||
Working wavelength | nm | PON:TX1310,RX1490 | ||
I | ||||
CAL | ||||
TX POWER | dBm | 1-4(GPON) | ||
RX Sensitivity | dBm | ≥ -27 | ||
optic connector | / | SC/APC or SC/UPC | ||
WIFI | / | 802.11 b/g/n 2.4GHz 300Mbps | ||
OT | ||||
HE | ||||
R | ||||
TYPE | / | HGU | ||
POWER | V/A | AV110~255V→DC12V 1A | ||
Operating temperature | ℃ | -5~40 |
INTERFACES | Introduction |
ON/OFF | Power switch button |
Power | Power input interface, DC 12V/1A |
Optical | GPON fiber interfaces, using SC/APC or SC/UPC fiber access |
GE,FE | LAN service interface, GE is a gigabit port, and FE is a 100 Mbps port. |
Reset | Reset button |
WLAN | WIFI switch |
Indicator | Status | Description |
Power | ON | The device is powered on normally. |
OFF | The device is not powered on. | |
Twinkling | Received light, device not registered | |
ON | The ONU is connected to the OLT and registered successfully. | |
OFF | No optical received, device not registered | |
LOS | Twinkling | Fiber break or optical power exceeds limit |
OFF | ONU accepts normal optical power | |
ON | The network port is connected but no data is transmitted. | |
Twinkling | Network port has data transmission | |
OFF | The device is not powered on or the network port is not connected to the terminal device. | |
ON | WIFI works fine | |
Twinkling | WIFI has data transmission | |
OFF | WIFI work abnormally | |
Internet | ON | Successfully connected to the Internet |
OFF | Not connected to the Internet | |
OPT | OFF | RF output level is within the normal range |
ON | RF output level is not within the normal range |