Pine Round Logs
Pines are conifer trees in the genus Pinus, in the family Pinaceae.
Pines are evergreen, coniferous resinous trees (or rarely shrubs) growing 3–80 m tall, with the majority of species reaching 15–45 m tall.
The bark of most pines is thick and scaly, but some species have thin, flaking bark. The branches are produced in regular "pseudo whorls", actually a very tight spiral but appearing like a ring of branches arising from the same point.
Pines are among the most commercially important tree species valued for their timber and wood pulp throughout the world. The wood is used for pulp and sawn timber products. A seedling stand can be created by planting, sowing or natural regeneration. Commercial plantation rotations vary between 50–120 years, with longer rotations in northeastern areas where growth is slower.
The wood is pale brown to red-brown, and used for general construction work. It has a dry density of around 470 kg/m3 (varying with growth conditions), an open porosity of 60%, a fibre saturation point of 0.25 kg/kg and a saturation moisture content of 1.60 kg/kg. Pine fibres are used to make the textile known as vegetable flannel, which has a hemp like appearance, but with a tighter, softer texture.
We offer following trade specifications:
Pine logs (Pinus Silvestris)
Country of origin Lithuania, Latvia, Estonia
Diameters 6-18 cm; 20+ cm
Lengths 2.5 m; 2.9 m; 3.0 m; 3.6 m;4.8 m
Grades A, B, C
1 SUPPLIER OF PINE LOGS AND LUMBER
DISCLAIMER: Timber is a natural product and may differ from the sample seen in colour and figure. Certain species of timber will contain a small percentage of sap and knots in line with international grading standards.
We specialize in exporting high quality, clear pine lumber to Europe, the Middle East, the Caribbean, the Americas, Asia, Mexico, and many other parts around the world.
Standards that are supported:
A grade- 4 sides clear - is the highest class quality.The timber is clean, flawless (without knots and / or hearts).
AB grade - 4 sides clear - on one side of the piece of timber found traces of hearts healthy and / or a healthy node.
BC grade – 3 sides clear - allowed red heart, knots, bends and small cracks.
Lengths
0.30 to 0.95 m timber sub-short (TASS)
1.00 to 1.70 m short timber (TAS)
1.80 to 2.00 m long timber (TAL)
2.10 to 3.00 m long super-timber (TAL +)
Drying: KD, KD 10-14%
Markings: timber is packed with one length in the bundle and can have markings at customer request.
About Pine
Species: Pine
Scientific Names: Pinus Sylvestris | Pinus resinosa | Pinus radiata
Common Uses:
Utility poles, posts, railroad ties, paper (pulpwood), and construction lumber.
Comments:
The alternate common name of “Norway Pine” is somewhat mystifying, as the tree did not originate from Norway, and there’s no clear link with Norway.