Fountain aerator push flow aerator

Application scope: Fountain aerator is a high-efficiency and energy-saving water treatment equipment specially designed for the purification and improvement of water quality in rivers and lakes. It is used for landscape water treatment of artificial and natural lakes, parks,villas, ecological houses, golf courses, urban rivers and lakes, diversion canals, lake river network water systems, ecological leisure parks and lakes. Product features: 1. High output efficiency and obvious water circulation effect; It has the advantages of compact structure, high performance,low loss, low noise, energy saving, low consumption and environmental protection,Low failure rate, good dissolving effect and good fruit. 2. There are no special requirements for floating (pontoon) installation. Only two pipes need to be inserted into the mud bottom to pull the rope to fix the equipment. 3. This product integrates aeration spring and aeration in one machine, without any machine room and any pipeline, pump and valve, and there is no blockage. 4. The fountain aerator has characteristic landscaping function equipment. It sprays trumpet flowers with beautiful shape, which increases the temperament and decoration of the lake,It fully embodies the harmony between man and nature.five In the working process, the product has the superior function of promoting water circulation and effectively preventing the problem of closed water quality putrefaction. It is worth mentioning that the spray painted water has the shape of ornamental bell shaped flowers. It can also be equipped with landscape lights to add light and color to the landscape water body. working principle: Water lifting aerator for landscape lake The high-performance motor directly drives the impeller of the fountain aerator to rotate at high speed. According to the mixing and lifting principle of hydraulic machinery, the water at the bottom of the lake water body is directly lifted to the water surface and thrown out to contact with the air to form a water curtain, which makes the water layer circulate up and down, and the water lifting capacity can reach 5120 L / min Clock. The high-speed rotating propeller is configured to fully stir the lake water while lifting water, so as to dissolve oxygen in the lake water. When the water mentioned is in contact with the air (the air contains 21% oxygen), it can decompose a large number of toxic substances in the water, so as to achieve the goal of strong oxygenation and dissolved oxygen and rapid improvement of water quality of In the process of up-down accelerated circulation of the water layer, the water body is fully exposed to oxygen, the organic matter in the water is removed, and the stratification phenomenon of the water is eliminated, so as to reduce the BOD (biochemical oxygen demand) and COD (chemical oxygen demand) values, achieve the effect of phosphorus and nitrogen removal, effectively prevent the decay and odor of non mobile water quality, and eliminate the black odor phenomenon. The spray generated by strong power can cover the whole water surface, make oxygen evenly distributed to the whole lake water body, increase the dissolved oxygen (do) content in the water, effectively balance the ecosystem and greatly improve the water ecological environment. Through aeration,the lake water will become clear in a few days, so as to purify the water quality, protect and restore the natural ecological water source, and create a beautiful natural water landscape. matters needing attention: 1. The movable rubber sheathed waterproof cable shall be used for the power line, one core of which shall be reliably grounded with the motor shell, and check whether the voltage and current are consistent with the rated power of the aeration equipment. 2. The installation depth shall be strictly controlled according to the technical parameter table, and the working depth shall ont be adjusted arbitrarily. 3. When the aerator works underwater, the water flow direction is pushed up and down, otherwise the rotation direction of the main engine is revesed. At this time, you only need to replace any two of the three connectors. The rotation direction of single-phase aerator has been set in the manufacturing process. 4. There shall be no long fiber sundries such as metal wire, rope and plastic bag in the pool to avoid winding the impeller and blocking the water inlet. 5. During operation, when the control system is equipped with power cut-off, it is necessary to find out the cause in time and start it after troubleshooting. It must not be started after free short circuit. 6. The voltage is 380V three-phase AC power supply (the allowable voltage is ± 5%), The frequency is 50Hz, and the working water temperature is not lower than 0 ℃ and not higher than 40 ℃