Foundry Industry Heat Resistant Hot Metal Ladle Ferry Transfer Trolley
The Ferry transfer car is made up of the upper car and down car. The rail is mounted underneath the car and used for connecting with other rails, the Ferry transfer car can realize cargo transfer among crossing rails.
The Ferry transfer car is made up of two parts. The upper car is used for transporting cargo. The down car is usually designed to run underground. The rail is mounted underneath the car and used for connecting with other rails in workshops which makes the upper car be able to run on parallel rails, play the role of the bridge. The Ferry transfer car also can realize cargo transfer among crossing rails.
Technical parameters of some models(Customizable)
Model |
BXC-10t |
BXC-20t |
BXC-30t |
BXC-50t |
BXC-100t |
BXC-150t |
|
Rated Load(t) |
10 |
20 |
30 |
50 |
100 |
150 |
|
Table Size(mm) |
Length( L) |
3600 |
4000 |
4500 |
5500 |
6500 |
10000 |
Width( W) |
2000 |
2200 |
2200 |
2500 |
2800 |
3000 |
|
Height( H) |
500 |
550 |
600 |
650 |
900 |
1200 |
|
Wheel Base(mm) |
2600 |
2800 |
3200 |
4200 |
4900 |
7000 |
|
Rail Inner Gauge(mm) |
1435 |
1435 |
1435 |
1435 |
2000 |
2000 |
|
Wheel Diameter(mm) |
300 |
350 |
400 |
500 |
600 |
600 |
|
Wheel Quantity |
4 |
4 |
4 |
4 |
4 |
8 |
|
Ground Clearance(mm) |
50 |
50 |
50 |
50 |
75 |
75 |
|
Running Speed(m/min) |
0-25 |
0-20 |
0-20 |
0-20 |
0-20 |
0-18 |
|
Motor Power(Kw) |
1.6 |
2.2 |
3.5 |
5 |
10 |
15 |
|
Battery Capacity(Ah) |
160 |
180 |
250 |
330 |
440 |
600 |
|
Battery Voltage(V) |
48 |
48 |
48 |
48 |
72 |
72 |
|
Running Time When Full Load |
4.8 |
4 |
3.5 |
3.3 |
3.2 |
2.9 |
|
Running Distance for One Charge(Km) |
7.2 |
4.8 |
4.2 |
4 |
3.8 |
3.2 |
|
Max Wheel Load(KN) |
42.6 |
77.7 |
110.4 |
174 |
343.8 |
265.2 |
|
Reference Weight(t) |
4.2 |
5.9 |
6.8 |
8 |
14.6 |
26.8 |
|
Recommended Rail Model |
P18 |
P24 |
P38 |
P43 |
QU100 |
QU100 |
1.Q: Can this type of car run directly on the cement floor?
A: Yes, trackless cars can operate on cement or steel floor according to different loads.
2.Q: Our use space is limited. What is the minimum turning radius?
A: According to the design of the car's countertop, the car can rotate in place, and the minimum turning radius is the length of the flat car's body.
3.Q: Can hydraulic devices be added to this car?
A: We can increase hydraulic lift according to customer's demand.
4.Q: The floor of the workshop we use is uneven and has a small bump. Can we use it?
A: According to the size of bumps and the running distance of the car, we can decide whether we can choose this type of adjustment to ensure the level of the table. Generally, the bumps and concaves can be used no more than 10cm.
5.Q: Can Trackless Vehicles Be Automated?
A: Yes, we can design and locate according to your situation to realize remote automatic control.