Our workshop
The Product Name: | Dia20mm-Dia150mm(4/5''-6'')Forged Steel Grinding Balls | ||||||
Technology: | Hammer Forged or Hot Rolling | ||||||
Hardness: | From 54HRC to 65HRC | ||||||
Standard: | DIN GB ISO JIS BA ANSI YB/T091-2005 | ||||||
Impact Test: | AK.>12 J/CM2 Min | ||||||
Falling Test Times | 12000 Times Minimum with a dropping test machine of 6 mts. | ||||||
Breakage Rate | 2.0%max |
Brand | Material | C | Mn | Cr | S | P | Si |
HY-1 | 45# | 0.42-0.50 | 0.50-0.80 | ≤0.25 | 0.030max | 0.030max | 0.17-0.37 |
HY-2 | 50Mn | 0.48-0.56 | 0.70-1.20 | ≤0.25 | 0.030max | 0.030max | 0.17-0.37 |
HY-3 | 60Mn | 0.57-0.65 | 0.60-0.70 | ≤0.25 | 0.030max | 0.030max | 0.17-0.37 |
HY-4 | 65Mn | 0.60-0.70 | 0.70-1.20 | ≤0.25 | 0.030max | 0.030max | 0.17-0.37 |
HY-5 | B2 | 0.72-0.85 | 0.70-1.20 | 0.42-0.85 | 0.030max | 0.030max | 0.17-0.37 |
HY-6 | B3 | 0.50-0.65 | 0.70-1.20 | 0.77-1.10 | 0.030max | 0.030max | 1.40-1.80 |
HY-7 | B4 | 0.58-0.66 | 0.65-0.80 | 0.70-0.90 | 0.025max | 0.025max | 1.30-1.90 |
材质 | 冲击值 | 落球疲劳次数 | 硬度 Hardness(HRC) | 破碎率 | ||||||
Material | Impact Test (AK.j/cm2) | Endurance Test Times(5m/次) | Dia25mm-Dia90mm | Dia100mm-Dia150mm | Breakage(%) | |||||
Surface | Core | Surface | Core | |||||||
B2 | ≥17 | ≥10000 | ≥62 | ≥58 | ≥56 | ≥45 | <1% | |||
60Mn | ≥15 | ≥12000 | ≥60 | ≥45 | ≥56 | ≥38 | ||||
45# | ≥12 | ≥10000 | ≥56 | ≥36 | ≥52 | ≥35 | ||||
50Mn | ≥13 | ≥10000 | ≥58 | ≥38 | ≥54 | ≥32 | ||||
65Mn | ≥17 | ≥12000 | ≥60 | ≥43 | ≥56 | ≥40 | ||||
B3 | ≥18 | ≥12000 | ≥60 | ≥60 | ≥57 | ≥52 |
Nominal Diameter(mm) | Diameter Tolerance(mm) | Weight of Single Forged Ball IN Average(g) | Number of Piece of One Ton Forged Ball In Average | Surface Hardness(HRC) | Impact Toughness(j/cm2) |
Φ20 | 32 | 31250 | 50—65 | ≥12 | |
Φ25 | 64 | 15625 | ≥12 | ||
Φ30 | 110 | 9090 | |||
Φ40 | 263 | 3802 | |||
Φ50 | 513 | 1949 | |||
Φ60 | +3—2 | 888 | 1126 | ||
Φ70 | 1410 | 709 | |||
Φ80 | 2104 | 475 | |||
Φ90 | 2996 | 333 | |||
Φ100 | 4110 | 243 | |||
Φ110 | +4—2 | 5457 | 182 | 45-60 | |
Φ120 | 7102 | 140 | |||
Φ130 | 9030 | 110 | |||
Φ140 | +4—3 | 11278 | 88 | ||
Φ150 | 13871 | 72 |