For REXROTH 4WE6 series 4WE6Y6X/EG24N9K4 4WE6C/4WE6D one solenoid valve

Product Overview                                                                      

                                  Rexroth hydraulic valve

A hydraulic valve is an automation component operated by pressure oil. It is controlled by a pressure distribution valve and pressure oil. It is usually used in combination with an electromagnetic pressure distribution valve. It can be used to remotely control the on and off of the oil, gas, and water pipeline

systems of hydropower stations. Commonly used for clamping, control,lubrication and other oil circuits.

There are direct-acting type and pilot type, and the pilot type is mostly used.

FEATURES AT A GLANCE                                                         

                                                      Hydraulic valve design principle

The design of the hydraulic valve is mainly for the design of the hydraulic valve group, and the oil circuit must be considered before the design of the hydraulic valve group. It is necessary to determine in advance which parts of the oil circuit can be integrated. The design of the oil circuit must be simple and save Go unnecessary steps. After determining the oil circuit, the main thing is the oblique hole and the process hole. These things in the oil path should be reduced. As long as it is enough, it is not necessary too much. Pay attention to the hole diameter in the design of the oblique hole and the process hole.

           Product picture                                     Product picture                                 Product picture

PRODUCT SPECIFICATIONS                                                     

Company Profile                                                                        

Recommend Products                                                                  

Packing And Shipping                                                                  

FAQ